Jump to content
Do Not Sell My Personal Information

2002 Focus ST170


JC600
 Share

Recommended Posts

1 hour ago, JayG90 said:

What sort of hoover do you use? I'm currently using a Dyson and it wont pick nothing up! so needing some ideas what people use to get such clean effects :D

I use my old Electrolux hoover, but it's not picking up as well as it used to.....few people I know use Henry's and work really well.  

Link to comment
Share on other sites


1985 Vax. Never let me down in 31 years

  • Like 2
Link to comment
Share on other sites

Since I brought the car, its had a broken mirror that vibrates and wobbles about, as the clips in side broken. I found one on eBay and won it for £1.04 lol

Before

DSC_0098_zpsrvxrxisz.jpg

DSC_0097_zpsdji9aodl.jpg

After 

DSC_0099_zps0y6h3jh1.jpg

Happy days :D

  • Like 2
Link to comment
Share on other sites

If only all our problems could be solved for £1.04!

  • Like 1
Link to comment
Share on other sites


New cross over pipe fitted, so no more leaks......silicone hoses didn't fit, but company on eBay said they will give a full refund. :)

Link to comment
Share on other sites

Re-done my gear knob as I didn't like the red, so done it in dark grey. Looks loads better. :)

DSC_0101_zpshlqgs2dz.jpg

Also repaired scuffs, and re lacquered the mirror from the new mirror as it's a better fit. Plus then I'll have a spare one lol.

DSC_0102_zpssbgentto.jpg

  • Like 3
Link to comment
Share on other sites

That is a nice Focus  ST170 , I quite like the focus, it  has proven popular and a fine successor of the Escort 

  • Like 1
Link to comment
Share on other sites

9 hours ago, Antonelson96 said:

That is a nice Focus  ST170 , I quite like the focus, it  has proven popular and a fine successor of the Escort 

Cheers mate, I was on the lookout for a mk5/6 Escort when I got this....I really like it, good fun to drive and easy going around town. :)

Link to comment
Share on other sites

Yesterday the ST started jerking at 3000-3500 rpm.....this morning my neighbour started the car so I could see if the cable on the imrc moved. When I noticed it wasn't attached.....so Re-fitted it, took for a drive and it was spot on. Also popped into my brothers work and plugged it into the snap on diagnosis machine. Only codes were P1518 & P1519, cleared these test drive and re-tested. No codes found. :)

Link to comment
Share on other sites

Ordered some Genuine Ford mats today, also found some 12v blanks for the 2 12v sockets.

Then a good wash and wax. Love the magnum grey after a wax. :D

DSC_0110_zpsfttrwl1u.jpg

DSC_0109_zps5j9gwp5e.jpg

DSC_0108_zpsuhdxeg4y.jpg

DSC_0107_zpspwjnhb5k.jpg

DSC_0106_zpsdjhymgs4.jpg

DSC_0105_zpsva25vvsm.jpg

DSC_0104_zpsgsbnobtz.jpg

  • Like 3
Link to comment
Share on other sites

Ordered some Genuine Ford mats today, also found some 12v blanks for the 2 12v sockets.

Then a good wash and wax. Love the magnum grey after a wax. :D

DSC_0110_zpsfttrwl1u.jpg

DSC_0109_zps5j9gwp5e.jpg

DSC_0108_zpsuhdxeg4y.jpg

DSC_0107_zpspwjnhb5k.jpg

DSC_0106_zpsdjhymgs4.jpg

DSC_0105_zpsva25vvsm.jpg

DSC_0104_zpsgsbnobtz.jpg

Awesome turnaround

Always loved the st170. Going back still badly miss my mk1.5 2.0 zetec esp.d1d99e23318366f001094e2083667b49.jpg

a1caf03de9cbec51bb681248958bba58.jpg

1fbedec22446d8d29fd761c449f7f542.jpg

Yunii

Sent from my SM-G925F using Tapatalk

  • Like 2
Link to comment
Share on other sites

You've done a great job on that. Hope mine looks that good at 14 years.

  • Like 1
Link to comment
Share on other sites

3 minutes ago, btmaldon said:

You've done a great job on that. Hope mine looks that good at 14 years.

Cheers mate, it's getting there. :D

57 minutes ago, yunii said:

Awesome turnaround

Always loved the st170. Going back still badly miss my mk1.5 2.0 zetec esp.d1d99e23318366f001094e2083667b49.jpg

a1caf03de9cbec51bb681248958bba58.jpg

1fbedec22446d8d29fd761c449f7f542.jpg

Yunii

Sent from my SM-G925F using Tapatalk

Cheers mate, yours looked mint. :D

Link to comment
Share on other sites

You've done a great job on that. Hope mine looks that good at 14 years.

Cheers mate, it's getting there. :D

Awesome turnaround

Always loved the st170. Going back still badly miss my mk1.5 2.0 zetec esp.d1d99e23318366f001094e2083667b49.jpg

a1caf03de9cbec51bb681248958bba58.jpg

1fbedec22446d8d29fd761c449f7f542.jpg

Yunii

Sent from my SM-G925F using Tapatalk

Cheers mate, yours looked mint. :D

It was & was very highly specced.

Note cruise control in pic.

Sent from my SM-G925F using Tapatalk

  • Like 1
Link to comment
Share on other sites


Yeah, noticed that & SVT rear lights. :)

Link to comment
Share on other sites

New mats arrived today, couldn't hoover the car though as it kept raining. Look loads better. :D

DSC_0113_zpssnrb7k3c.jpg

DSC_0114_zpshuzhd8oc.jpg

Link to comment
Share on other sites

Put a jubilee clip on the throttle body hose, as it was missing.......and the car is booked for smart repair at the end of the month. :) front bumper is being painted and repaired, all the previous touch up paint is getting cleaned up and blended in. Rust under wing mirror is being treated and then painted. Any other chips or scratches are being touched in. Then the whole car will be mopped. 

Decided to go down this route, as didn't want the cost of different panels being fully painted and blended in. Then someone open a door into it, in a car park or something......Just want it clean and tidy. :)

Only down side is I can't polish it till its done now lol 

  • Like 1
Link to comment
Share on other sites

This still looks great no matter where i see it and i'm really looking forward to seeing it after you've had the smart repair done next month ;) ..

  • Like 1
Link to comment
Share on other sites

Cheers mate.  :biggrin:

Link to comment
Share on other sites

  • 2 weeks later...

First off, the jerking problem seems to of gone......noticed it was only doing it when I had less than 1/4 tank. So put some fuel system cleaner in and brimmed the tank. Used 1/2 a tank so far, and all good through the rev range so far. Fingers crossed. :)

Also brought a second hand gear knob with really good leather. But the polished finish was going grubby to quick. So sanded down with the drill, coloured the numbers dark blue and about 4-5 coats of clear acrylic metal lacquer. :)

Ready to go back in the car, but going to get some new gaiters first. :)

DSC_0169_zpsi30bsfq6.jpg

DSC_0168_zps4y7p8v2v.jpg

  • Like 1
Link to comment
Share on other sites

looking good fella and once you have had the paint repairs done it will look 100 times better

  • Like 1
Link to comment
Share on other sites

Cheers mate, I can't wait lol :D

Link to comment
Share on other sites

  • 2 weeks later...

Car goes for paint on Saturday, can't wait! :D

Also just been out for blast, still running spot on........so much fun to drive, and handles like it's on rails. :D

Once it's back from paint, I'll fit my refurbished gear knob with new gaiters.  And treat all the leather trim. 

Also trying to make my mind up wether to get new alloys or get the St ones refurbished with new Centre caps.  

  • Like 1
Link to comment
Share on other sites

Wheels are booked in to be refurbished in about 2 weeks time....getting them done in hi-power silver and going to buy some new oe Centre caps.  They also offer a caliper painting service whilst the wheels are being done, so thought it would be rude not to get them done too lol :D

  • Like 2
Link to comment
Share on other sites

Latest Deals

Ford UK Shop for genuine Ford parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share







×
×
  • Create New...

Forums


News


Membership