jwc28 Posted January 26, 2015 Share Posted January 26, 2015 I know a lot of the zetecs etc have the bulb holders and wiring etc. But I'd say if you have a focus sport which is essentially a titanium minus a couple of things you are very likely to have the holders and wiring. I looked at this thread for the first time last night and I went out to my 11 plate sport (which another guy quite rightly said this is one of the last mk 2.5's which was placed on sale as a budget option to the mk 3) and I have the bulb holders and wiring.....I'm sure I have a couple of spare number plate bulbs so I will give it a go. Don't see why it shouldn't work. They are easy to find. Just take a torch dowm to footwell. Hope they work! Quote Link to comment Share on other sites More sharing options...
InKontrol Posted January 26, 2015 Share Posted January 26, 2015 I know a lot of the zetecs etc have the bulb holders and wiring etc. But I'd say if you have a focus sport which is essentially a titanium minus a couple of things you are very likely to have the holders and wiring. I looked at this thread for the first time last night and I went out to my 11 plate sport (which another guy quite rightly said this is one of the last mk 2.5's which was placed on sale as a budget option to the mk 3) and I have the bulb holders and wiring.....I'm sure I have a couple of spare number plate bulbs so I will give it a go. Don't see why it shouldn't work. They are easy to find. Just take a torch dowm to footwell. Hope they work! They should work, mine's a 2011 Sport too and it was a case of just popping the LEDs in and away you go. Makes a world of difference when you open the front doors... :) Sent from my iPhone using Ford OC Quote Link to comment Share on other sites More sharing options...
jwc28 Posted January 26, 2015 Share Posted January 26, 2015 It works Quote Link to comment Share on other sites More sharing options...
jwc28 Posted January 26, 2015 Share Posted January 26, 2015 I just put in boring old number plate lights in! I'm thinking some red mood lighting like you see in the new Astra's might be cooler or blue Quote Link to comment Share on other sites More sharing options...
jwc28 Posted January 26, 2015 Share Posted January 26, 2015 Just shows you how cars are made to a budget and every penny per car counts. I mean, wiring and bulb holders and no bulbs. With the amount of bulbs ford would have needed from the bulb manufacturer they would have literally been pence per car. I really hope footwell lighting wasn't an option for a given trim level or customers would have been severely ripped off.. I know its std in titanium Quote Link to comment Share on other sites More sharing options...
PHILIP1193 Posted February 24, 2015 Share Posted February 24, 2015 Just posting to say thanks. New Zetec S and i have the holders in black. *Edit* got all excited and noticed i have a literal holder but not the bulb bit. DOH! :( Quote Link to comment Share on other sites More sharing options...
Dee_82 Posted February 24, 2015 Share Posted February 24, 2015 don't let that stop you, put one in it ;) Quote Link to comment Share on other sites More sharing options...
J87 Posted February 25, 2015 Share Posted February 25, 2015 mine is the same on my 59 zetec s holders but no bulb bit Quote Link to comment Share on other sites More sharing options...
MONDEO TXS 2.2 Posted February 25, 2015 Share Posted February 25, 2015 My 05 reg Mondeo ST TDCi was the same - footwell bulbholders but no bulbs - talk about penny pinching ! Quote Link to comment Share on other sites More sharing options...
joe bloggs Posted January 18, 2016 Share Posted January 18, 2016 many thx mine has them, shoved in some normal bulbs, until some Blue ice leds arrived love em 1 Quote Link to comment Share on other sites More sharing options...
daveb1234567890 Posted March 30, 2016 Share Posted March 30, 2016 On 1/14/2011 at 10:31 AM, pugboy said: Hi Not sure if you guys on here know this, but the majority of the current Focus models are prewired for the footwell lights - you just plug the bulbs in! I've done this on my 55 plate Zetec and on two of my workmates cars who have 08 plate Zetec's. Just letting you know anyway as its a nice little extra to have and it only costs a couple of quid for the bulbs. If anyone else knows of any similar enhancements that can be made on the cheap let me know. Can you tell me how you put your lights in I have been looking on my focus zetec ecbost but I can't find anything Quote Link to comment Share on other sites More sharing options...
paul321 Posted March 30, 2016 Share Posted March 30, 2016 (edited) 2 hours ago, daveb1234567890 said: Can you tell me how you put your lights in I have been looking on my focus zetec ecbost but I can't find anything If it's a focus ecoboost I imagine that'll be a mk3 focus. The pre-wired footwell lights referred to here were on focus mk2/mk2.5. Not too familiar with mk3,only got a mk2.5 myself,could in theory have pre-wired holders in footwell as well but not got one myself to check so couldn't tell you I'm afraid,sorry. Some have put up pictures further down on page 1 and also on page 3 of where they are on mk2/mk2.5 if any help,obviously won't be exactly the same on mk3 but gives an illustration of where they are on mk2. Edited March 30, 2016 by paul321 Quote Link to comment Share on other sites More sharing options...
Exeter Posted July 28, 2016 Share Posted July 28, 2016 Became a member just to say a massive thanks to the OP! Looks so good in my focus and so easy to do 2 Quote Link to comment Share on other sites More sharing options...
Ianb Posted July 28, 2016 Share Posted July 28, 2016 1 hour ago, Exeter said: Became a member just to say a massive thanks to the OP! Looks so good in my focus and so easy to do Easy when it's prewired ¬_¬ GRRR Welcome :D 2 Quote Link to comment Share on other sites More sharing options...
Lenny Posted July 28, 2016 Share Posted July 28, 2016 30 minutes ago, Ianb said: Easy when it's prewired ¬_¬ GRRR Welcome :D See my guide if your not factory wired or want to add an illuminated ignition ring and rear footwell lighting : 1 Quote Link to comment Share on other sites More sharing options...
RossF Posted July 9, 2017 Share Posted July 9, 2017 Just Checked Mine 7 i Have them , awesome , i put Osram Led's in them white ones i was going to put in sidelights but i will put them in sidelights and get blue or Red ones for Footwell , My Car is Focus 2010 1.6tdci Zetec S (3 door) if it helps anyone else Quote Link to comment Share on other sites More sharing options...
Paisleyjim Posted February 5, 2018 Share Posted February 5, 2018 ive no got them .. and my basic focus lx did have them Quote Link to comment Share on other sites More sharing options...
Stevesixty7 Posted February 5, 2018 Share Posted February 5, 2018 Mine has them, not sure if it's because it's a Ghia or old. You'd think they'd be in newer models, that has surprised me that they're not. Quote Link to comment Share on other sites More sharing options...
F0CUE Posted February 5, 2018 Share Posted February 5, 2018 Weird it's only in some they are in my style have blue bulbs looks great. 1 Quote Link to comment Share on other sites More sharing options...
Mattengland.25 Posted June 7, 2020 Share Posted June 7, 2020 (edited) On 1/15/2011 at 11:57 AM, starfield said: I am really interested in this thread. Where is the footwell light meant to be and where can i find the wiring? Were did you find the wires m8 iv looked all day still not find them 😐 do you have pictures m8 Edited June 7, 2020 by Mattengland.25 Quote Link to comment Share on other sites More sharing options...
Stoney871 Posted June 7, 2020 Share Posted June 7, 2020 Sent from my SM-G965F using Tapatalk Quote Link to comment Share on other sites More sharing options...
Mattengland.25 Posted June 7, 2020 Share Posted June 7, 2020 On 1/19/2011 at 6:36 PM, catch said: That's a bummer Anyway I've been out an taken a picture for you Have you got pictures from were the wiring comes from please Quote Link to comment Share on other sites More sharing options...
Stoney871 Posted June 8, 2020 Share Posted June 8, 2020 Right, I know I've pegged this as a necrothread but will attempt to help you out.If you don't have wiring for footwell lights you can tap from the loom at the headlight switch.You need to pull the switch out first-Locate the torx screw in the recess that the obd port is fitted into.Remove screw and the panel will pull forward (give it a decent tug to detatch the panel clips).Unclip the obd port and drop the panel away.Reach behind headlight switch and there are flaps at the top & bottom, pinch towards the switch and push the switch forward.The wire to pin 16 is the switched live feed to the number plate lights, the footwell lights will come on when the headlights are turned on (sidelight phase and above).Run 2 live feeds on parallel to t10 bulb holders.For an earth just run parallel wires from the holders to any body mounted screw or bolt. Sent from my SM-G965F using Tapatalk Quote Link to comment Share on other sites More sharing options...
Hellblazer99 Posted January 30, 2021 Share Posted January 30, 2021 Quote Guys, i found the wiring and de bulb holder in my focus mk2.5 but when i plug the bulbs nothnig work...whats wrong? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.