Kuga180 Posted October 18, 2018 Share Posted October 18, 2018 Hi I have retro fitted a reversing camera to my Ford Kuga 65 Plate (UK). I did have details on how to enable this is the Sync2 system using for scan. From memory it was changing a few digits. Please can anyone help me and point me in the right direction to "Enable the Camera" using Forscan. Thank you Simon Quote Link to comment Share on other sites More sharing options...
Glfb Posted December 12, 2018 Share Posted December 12, 2018 On 10/18/2018 at 7:36 PM, Kuga180 said: Hi I have retro fitted a reversing camera to my Ford Kuga 65 Plate (UK). I did have details on how to enable this is the Sync2 system using for scan. From memory it was changing a few digits. Please can anyone help me and point me in the right direction to "Enable the Camera" using Forscan. Thank you Simon Hi simon I have been searching for weeks to find out if any body has codes . I have put my car into our local dealers to see if they can activate it with no joy . I have now come across you & wondered if you had any joy with forscan & programming Quote Link to comment Share on other sites More sharing options...
oxid8ter Posted February 28, 2020 Share Posted February 28, 2020 Taken from the ForScan forums: Try the folowing, 1- Go to the APIM As-Built 2- Do a backup of your original APIM (just in case) 3- Change block 7D0-01-01 x*xx-xxxx-xxxx *=3 With camera no PDC *=9 No camera with PDC *=B With camera and PDC So you would change the * to either 3 or B depending if you have PDC. Quote Link to comment Share on other sites More sharing options...
Rickychips Posted March 5, 2020 Share Posted March 5, 2020 On 2/28/2020 at 3:17 PM, oxid8ter said: Taken from the ForScan forums: Try the folowing, 1- Go to the APIM As-Built 2- Do a backup of your original APIM (just in case) 3- Change block 7D0-01-01 x*xx-xxxx-xxxx *=3 With camera no PDC *=9 No camera with PDC *=B With camera and PDC So you would change the * to either 3 or B depending if you have PDC. I installed a boot latch camera on a 2015 Ford focus followed these procedures and all I'm getting is a black screen any idea what's wrong? Quote Link to comment Share on other sites More sharing options...
oxid8ter Posted March 5, 2020 Share Posted March 5, 2020 5 hours ago, Rickychips said: I installed a boot latch camera on a 2015 Ford focus followed these procedures and all I'm getting is a black screen any idea what's wrong? better off checking on the ForScan forums mate - I just pulled them from there and shared here. Quote Link to comment Share on other sites More sharing options...
Catswiska2 Posted May 24, 2020 Share Posted May 24, 2020 I used these instructions on mine yesterday and it is working great. On 2/28/2020 at 3:17 PM, oxid8ter said: Taken from the ForScan forums: Try the folowing, 1- Go to the APIM As-Built 2- Do a backup of your original APIM (just in case) 3- Change block 7D0-01-01 x*xx-xxxx-xxxx *=3 With camera no PDC *=9 No camera with PDC *=B With camera and PDC So you would change the * to either 3 or B depending if you have PDC. Quote Link to comment Share on other sites More sharing options...
DYMA Posted January 6, 2021 Share Posted January 6, 2021 Hi , I want to fit reversing camera to my ford kuga 2019, I can get wiring harness for £40 to fit straight to unit. However they all state "Needs code added", doe anybody know were to buy coder that plugs into pins to do this . thanks tom Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.