1.5 tdci fuel filter inlet pipe removal

[Hootbleet]

I’ve tried to replace the fuel filter paper element but for the life of me I cannot get the inlet pipe off the housing. I’ve released the white plastic clip on top and you would think the pipe would just pull out but alas no. I’ve included a photo below with release tab pulled up. I’ve then squeezed the clip on both sides (marked A) on the picture and at the same time I’ve pulled and/or pushed the fuel pipe (B) but it doesn’t release.

Can anyone let me know where I’m going wrong? Thanks

 

[Hootbleet]

Issue solved. Lift up the centre piece as in the photo and then push down on both sides of the white clip, the pipe can then be pulled out.

[William Brennan]

Folks, I broke the white clip for the inlet pipe on the fuel filter. where can I get one. would anyone have a part number or any advice on where I would get one.

[unofix]

20 minutes ago, William Brennan said:

I broke the white clip for the inlet pipe on the fuel filter.

Post a photo of the broken part.

[TomsFocus]

20 minutes ago, William Brennan said:

Folks, I broke the white clip for the inlet pipe on the fuel filter. where can I get one. would anyone have a part number or any advice on where I would get one.

Only available as part of the filter housing.  

https://www.ebay.co.uk/itm/393427151450?

 

[unofix]

6 minutes ago, TomsFocus said:

Only available as part of the filter housing.  

Oh !! That white clip, that was a bad thing to break 🙁

[unofix]

Is it worth a gamble of £3.40 ????

These might fit (two different sizes) pack of 4. https://www.ebay.co.uk/itm/134669852896