liam-20 Posted September 18, 2013 Share Posted September 18, 2013 hey can anyone give me the latest link to the eml cheers. liam Quote Link to comment Share on other sites More sharing options...
jynxy Posted September 18, 2013 Share Posted September 18, 2013 It's in the first page. It's the same link. Or you could go back a few pages and see the link there. Quote Link to comment Share on other sites More sharing options...
liam-20 Posted September 18, 2013 Share Posted September 18, 2013 hey yer I used have program but got new lap top ive downloaded the elm but I need the extra files but the link to get um don't work am guessing its expired. Quote Link to comment Share on other sites More sharing options...
Preee Posted September 18, 2013 Author Share Posted September 18, 2013 hey can anyone give me the latest link to the eml cheers. liam On the first page of this Guide Liam Quote Link to comment Share on other sites More sharing options...
liam-20 Posted September 18, 2013 Share Posted September 18, 2013 Manged to download both files but still can't open the elm am running windows 7 if that helps cheers. Quote Link to comment Share on other sites More sharing options...
Zurrieq Posted September 19, 2013 Share Posted September 19, 2013 So how is the english version of FFN comming? Quote Link to comment Share on other sites More sharing options...
Brazh Posted September 20, 2013 Share Posted September 20, 2013 Manged to download both files but still can't open the elm am running windows 7 if that helps cheers. 1. What is USB-UART chipset (driver name)? 2. What number of COM port? Quote Link to comment Share on other sites More sharing options...
marius1980 Posted September 24, 2013 Share Posted September 24, 2013 Hello. I was wondering if i can change the language of the SRM module from german to english with this software. I own a FF2 facelift, 1.6 TDCI, 109 bhp. Quote Link to comment Share on other sites More sharing options...
mayak Posted September 24, 2013 Share Posted September 24, 2013 No Quote Link to comment Share on other sites More sharing options...
FlyLikeABird777 Posted September 26, 2013 Share Posted September 26, 2013 I recently purchased a pre-modded Elm from eBay (search "modified elm327" and scroll down to the blue one) as I didn't fancy chancing my luck with a soldering iron! Device arrived super quick and, much to my delight, works flawlessly. No problems connecting at 500K and I have already used it to activate auto-locking ;-) I was wondering what to activate next? Any recommendations..? Quote Link to comment Share on other sites More sharing options...
dezwez Posted September 29, 2013 Share Posted September 29, 2013 hi anyone no if you can alter the time the center display says on thanks Quote Link to comment Share on other sites More sharing options...
JW1982 Posted September 29, 2013 Share Posted September 29, 2013 The time which is shown on the display of the instrument cluster needs to be changed in the radio menu. When an aftermarket radio is fitted it is not possible anymore to change the time. In this case a workarround is to temporarily activate the fuel fired heater setting of the instrument cluster. if this setting is active the time can be set in the menu of the instrument cluster. When the time is correctly changed the fuel fired heater setting needs to be deactivated again. Quote Link to comment Share on other sites More sharing options...
dezwez Posted September 29, 2013 Share Posted September 29, 2013 The time which is shown on the display of the instrument cluster needs to be changed in the radio menu. When an aftermarket radio is fitted it is not possible anymore to change the time. In this case a workarround is to temporarily activate the fuel fired heater setting of the instrument cluster. if this setting is active the time can be set in the menu of the instrument cluster. When the time is correctly changed the fuel fired heater setting needs to be deactivated again. no it should have read hi anyone no if you can alter the time the light in center display stays on thanks Quote Link to comment Share on other sites More sharing options...
JW1982 Posted September 30, 2013 Share Posted September 30, 2013 Oh, I misread your question. The time the display still lights after the car is locked can not be changed. The display is switched on if the CANbus system is active. After the car is locked the CANbus system will go into sleep mode after 15-30 minutes. The time between locking the car and going into sleepmode the display will still be switched on. Quote Link to comment Share on other sites More sharing options...
dezwez Posted September 30, 2013 Share Posted September 30, 2013 ok thanks Quote Link to comment Share on other sites More sharing options...
jeebowhite Posted September 30, 2013 Share Posted September 30, 2013 I seem to have an issue with mine, where most the time (or at least every time I have looked) the light is on permenantly. That being said I do recurringly have a "can bus comms fault" error U1900 reported on my OBD.... Quote Link to comment Share on other sites More sharing options...
dezwez Posted October 5, 2013 Share Posted October 5, 2013 hi on this page I don't seem to be able to read or wright to it I have run my elm config at 500000 still nothing any help please Quote Link to comment Share on other sites More sharing options...
Preee Posted October 5, 2013 Author Share Posted October 5, 2013 Dezwez Your picture seems to show nothing selected , did you "read first". Quote Link to comment Share on other sites More sharing options...
dezwez Posted October 5, 2013 Share Posted October 5, 2013 Dezwez Your picture seems to show nothing selected , did you "read first". hi mate it what just comes up I am not able to read it nothing happens just says file frw.dat is missing Quote Link to comment Share on other sites More sharing options...
Preee Posted October 5, 2013 Author Share Posted October 5, 2013 hi mate it what just comes up I am not able to read it nothing happens just says file frw.dat is missing Ok from your download , make a folder and extract al files from the original download into it , ELMConfig is searching for the data folder , so place both the data folder and the Elmconfig.exe in it's own folder together. Quote Link to comment Share on other sites More sharing options...
dezwez Posted October 5, 2013 Share Posted October 5, 2013 Ok from your download , make a folder and extract al files from the original download into it , ELMConfig is searching for the data folder , so place both the data folder and the Elmconfig.exe in it's own folder together. Ok done that and it come up with a load of vbf files 8 of them Quote Link to comment Share on other sites More sharing options...
Preee Posted October 5, 2013 Author Share Posted October 5, 2013 Ok done that and it come up with a load of vbf files 8 of them Ok so you made a new folder , and inside that folder should be elmconfig.exe Data folder containing the .vbf files , frw.dat and code.dtc files so when you open your new folder , it should have elmconfig.exe and data folder. Quote Link to comment Share on other sites More sharing options...
dezwez Posted October 5, 2013 Share Posted October 5, 2013 Ok so you made a new folder , and inside that folder should be elmconfig.exe Data folder containing the .vbf files , frw.dat and code.dtc files so when you open your new folder , it should have elmconfig.exe and data folder. yes it does Quote Link to comment Share on other sites More sharing options...
Preee Posted October 5, 2013 Author Share Posted October 5, 2013 yes it does Ok give that a try see if it solves the problem. Quote Link to comment Share on other sites More sharing options...
dezwez Posted October 5, 2013 Share Posted October 5, 2013 ok will do thanks a lot :) 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.