mayak Posted December 2, 2013 Share Posted December 2, 2013 I have contacted these people loads of times, they give me the cost but never give me payment details to get one :( Author of UCDS asks you to send email again Quote Link to comment Share on other sites More sharing options...
jeebowhite Posted December 2, 2013 Share Posted December 2, 2013 Hi Mayak, are you related to the author in any way? Quote Link to comment Share on other sites More sharing options...
Tezza Posted December 2, 2013 Share Posted December 2, 2013 Author of UCDS asks you to send email againThank you mayak I have just sent another email Tezza Quote Link to comment Share on other sites More sharing options...
mayak Posted December 3, 2013 Share Posted December 3, 2013 Hi Mayak, are you related to the author in any way?noI just own an ucds adapter Quote Link to comment Share on other sites More sharing options...
jeebowhite Posted December 3, 2013 Share Posted December 3, 2013 I thought we had an insider for a moment there ;) Quote Link to comment Share on other sites More sharing options...
jpinhas Posted December 3, 2013 Share Posted December 3, 2013 In the new version of ELmConfig 0.2.12b, in HEC / Procedures tab, have a square to say"fill firmware list" now does nothing. In the future will give backto ROM 230?... And fix the delay of the instant fuel consumption. Sorry for my English. Quote Link to comment Share on other sites More sharing options...
jeebowhite Posted December 3, 2013 Share Posted December 3, 2013 It might well do :) Quote Link to comment Share on other sites More sharing options...
mayak Posted December 3, 2013 Share Posted December 3, 2013 According to civil-zz, once you get instant cons delay, it can't be cured in new ELMConfig you can update HEC with small display to rom 512 Quote Link to comment Share on other sites More sharing options...
jpinhas Posted December 3, 2013 Share Posted December 3, 2013 According to civil-zz, once you get instant cons delay, it can't be cured in new ELMConfig you can update HEC with small display to rom 512 This display? And how do I upgrade? Quote Link to comment Share on other sites More sharing options...
Tezza Posted December 3, 2013 Share Posted December 3, 2013 no I just own an ucds adapter Got a reply back but got to wait a week before I can purchase one :( Quote Link to comment Share on other sites More sharing options...
mayak Posted December 3, 2013 Share Posted December 3, 2013 Better than nothing :) Quote Link to comment Share on other sites More sharing options...
Tezza Posted December 3, 2013 Share Posted December 3, 2013 Better than nothing :)That's true fingers crossed this will happen :) Quote Link to comment Share on other sites More sharing options...
minimadgriff Posted December 3, 2013 Share Posted December 3, 2013 I have emailed UCDS too but never had a reply. Quote Link to comment Share on other sites More sharing options...
mayak Posted December 4, 2013 Share Posted December 4, 2013 So maybe try now Quote Link to comment Share on other sites More sharing options...
HotAction Posted December 4, 2013 Share Posted December 4, 2013 Hello First sorry for my bad English. Can someone ecplain me for what the different "submenu level" on the HEC Page two are? And if i activate Submenu level 3 must then also activate submenu level 2? And is it possilbe to show the speed in the Cluster (Digital form?) like in the test mode? Thanks Quote Link to comment Share on other sites More sharing options...
jeebowhite Posted December 4, 2013 Share Posted December 4, 2013 Hi Swen, The level 3 is only available on some instrument cluster firmware. But you need to tick all three and not just one level (it doesnt assume you want all up to that point) As for the display of the speedo, unfortunately you cannot display it on the standard menu as per the test mode. You would need to rewrite the firmware for the instrument cluster. Quote Link to comment Share on other sites More sharing options...
HotAction Posted December 4, 2013 Share Posted December 4, 2013 Thank you for your quick response. How do I know which SW the Level3 support? Damn it would have been a nice feature Quote Link to comment Share on other sites More sharing options...
jeebowhite Posted December 4, 2013 Share Posted December 4, 2013 if you try to write it and it fails, then its not the one you are using, you would be best off looking to upgrade the instrument cluster to the latest release. Quote Link to comment Share on other sites More sharing options...
Hyrule Posted December 4, 2013 Share Posted December 4, 2013 Been meaning to post for awhile. Ever since I did a few ELM updates such as autolocking & Eco mode, the miles to empty is about 20-25miles out of sync. Whilst it's not a huge issue as I look at the dial rather than the read out, its one of those things that bugs me. Anyway to fix this or do I literally just have to wait for a couple of hundred miles for the car to adapt? Cheers Quote Link to comment Share on other sites More sharing options...
jpinhas Posted December 4, 2013 Share Posted December 4, 2013 This display? And how do I update to the new version of elm? Quote Link to comment Share on other sites More sharing options...
jeebowhite Posted December 4, 2013 Share Posted December 4, 2013 Ben, I think this is coincidence, best thing to do is reset the car by disconnecting the battery and retrain her! 1 Quote Link to comment Share on other sites More sharing options...
Hyrule Posted December 4, 2013 Share Posted December 4, 2013 Ben, I think this is coincidence, best thing to do is reset the car by disconnecting the battery and retrain her! Ah ok cool, will that affect anything else disconnecting the battery? And it's just a case of disconnecting the negative cable, that should be enough to reset the ECM Quote Link to comment Share on other sites More sharing options...
HotAction Posted December 4, 2013 Share Posted December 4, 2013 I need a very fast answer, i try to reprogramm my hec to "reprogrammin (Rom level 0509) and now the Cluster dont work anymore. what have i done wrong and how can I get it to work again? Quote Link to comment Share on other sites More sharing options...
jeebowhite Posted December 4, 2013 Share Posted December 4, 2013 Swen: disconnect the battery, leave it for 10 minutes and reconnect. This should hopefully put it back. Ben: This shouldnt affect much, it will reset your cars fuel consumption rate and put it back into training mode. Any error codes will also be erased, but that will be all. Quote Link to comment Share on other sites More sharing options...
HotAction Posted December 4, 2013 Share Posted December 4, 2013 Thank you for you fast support. can you tell me hat the reprogramming of the rom level 0509 do?? I tried to start the vehicle and it starts but i can not give throttle Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.