1.6 Tdci Fiesta Mk7 Mufflerectomy

[Minkibiz]

Here is a before picture

To remove the back box i just used a angle grinder and then finished it off with a hacksaw took all of 10 min!

A hour of welding and cutting stainless pipe later and I put together this stainless steel straight pipe but wanted to keep it stealthy but a straight pipe out the back would take less effort.

Just attached with a exhaust clamp and gun gum.

Nice and simple stealthy mod tbh, fitting the egr plate was worse at least I could see what I was doing here!

On to the decat next! Just going to grind open the cat and rip its guts out!