Gary41 Posted November 26, 2020 Share Posted November 26, 2020 On 10/13/2015 at 10:52 AM, iantt said: Just thought I would mention a quick mod to those with small monochrome display in instrument cluster. Just swapped in a larger tft cluster, plug and play apart from writing in my higher current mileage. Doing that next. Is it literally just a one for one swap i have the top one and I just find it boring as hell! Do you have any links as to where I could pick one up please Quote Link to comment Share on other sites More sharing options...
jlawes20389 Posted November 26, 2020 Share Posted November 26, 2020 Yeah straight swap. As long as you've got the right petrol/diesel variant then it is just plug and play. If using one from a facelift in the pre-facelift you do lose a couple of things. I believe auto dimming and sound for the parking sensors but can't remember. Mileage is also stored in the cluster so would need adjusting to match your car. Quote Link to comment Share on other sites More sharing options...
DaSingh Posted December 2, 2020 Share Posted December 2, 2020 On 11/26/2020 at 9:08 PM, jlawes20389 said: Yeah straight swap. As long as you've got the right petrol/diesel variant then it is just plug and play. If using one from a facelift in the pre-facelift you do lose a couple of things. I believe auto dimming and sound for the parking sensors but can't remember. Mileage is also stored in the cluster so would need adjusting to match your car. This can be fixed by downgrading the firmware / calibration files for thr pre face lift buy then you lose digital speedo and 2nd trip. Quote Link to comment Share on other sites More sharing options...
JPW Posted January 22, 2021 Share Posted January 22, 2021 Hi @JW1982, I have a 2012 Titanium MK3 which I upgraded from the BT/VC to SYNC3 as you may recall (I posted a how-to). My Titanium has the larger IPC screen from factory with the 4 column layout, and I'm looking to upgrade that to the latest IPC software to get the digital speedo etc Will that cause any problems with me now having SYNC3 instead of the original setup? I have reverse parking sensors, reverse camera (all OEM) that work fine on the SYNC3 system at present. Do I need to upgrade all the files, or just some if I already have this 4 column IPC software? Thanks, James Quote Link to comment Share on other sites More sharing options...
jlawes20389 Posted January 22, 2021 Share Posted January 22, 2021 Wilko will likely know best but I think that if you still have the MK3 parking assist module rather than the MK3.5 one, you'll loose the parking sensor sound and visuals. As for the software, updating all is best as they'll be compatible with eachother. Mix and match may not be fully compatible I would imagine. Quote Link to comment Share on other sites More sharing options...
Rowan112 Posted March 22, 2021 Share Posted March 22, 2021 Hello, sorry for bumping this thread. @JW1982 I am curious about the mk3.5 speedometer cluster, you talk about incompatibility issues. I have a ford focus mk3 edge without any added features, so no sync, reversing camera, parking sensors, etc. colour of the dash is different too You mention how those don't work if use a 3.5 cluster on a mk3 car. Is there any other problems other than stuff like that? I would like the digital speedo and since i don't have any of the added features, would it be that much of a problem for me? Quote Link to comment Share on other sites More sharing options...
Vixplus7 Posted May 16, 2021 Share Posted May 16, 2021 Not sure if anyone can see this post but just bought a mk3 focus and want to upgrade my instrument cluster. Has anyone any idea of the cost to change the mileage in the new cluster? Quote Link to comment Share on other sites More sharing options...
DaSingh Posted May 17, 2021 Share Posted May 17, 2021 £60 odd quid for ipc Quote Link to comment Share on other sites More sharing options...
Redenez Posted September 27, 2021 Share Posted September 27, 2021 Hi Can anyone please show me where can i find mk3.5 Europe LCD instruments cluster firmware Quote Link to comment Share on other sites More sharing options...
jlawes20389 Posted September 27, 2021 Share Posted September 27, 2021 They can be downloaded directly from the ford tech website but you need to know the file names. https://www.fordtechservice.dealerconnection.com/vdirs/wds/PCMReprogram/DSFM_PCMReprogram.asp?swproduct=IDS Quote Link to comment Share on other sites More sharing options...
Redenez Posted September 27, 2021 Share Posted September 27, 2021 Thanks a lot bro 😁 1 Quote Link to comment Share on other sites More sharing options...
jlawes20389 Posted September 27, 2021 Share Posted September 27, 2021 No problem, hopefully you can find the ones you need. 1 Quote Link to comment Share on other sites More sharing options...
Redenez Posted September 28, 2021 Share Posted September 28, 2021 Yeah . I hope so too bro . I have a focus trend mk3.5 2016. 1.6Tdci With basic instrument cluster . I want to swap it with an LCD one... The way i see it . I will be facing a problem with the modified Foccus wich is not compatible with the mk3.5 .. so i can not adjust the mileage.. Anyone can help me with this??? Quote Link to comment Share on other sites More sharing options...
jlawes20389 Posted September 28, 2021 Share Posted September 28, 2021 I believe you can correct the mileage upwards using forscan too. Quote Link to comment Share on other sites More sharing options...
Redenez Posted September 28, 2021 Share Posted September 28, 2021 Ok I'll try ... Thanks again Quote Link to comment Share on other sites More sharing options...
jlawes20389 Posted September 28, 2021 Share Posted September 28, 2021 Is the new cluster a lower mileage than the one being removed? If so you should be good with forscan. 1 Quote Link to comment Share on other sites More sharing options...
unofix Posted September 28, 2021 Share Posted September 28, 2021 9 hours ago, Redenez said: can not adjust the mileage You can use the licenced version (about GB £10) of Forscan to adjust mileage upwards but not down. 1 Quote Link to comment Share on other sites More sharing options...
jlawes20389 Posted September 28, 2021 Share Posted September 28, 2021 1 hour ago, unofix said: You can use the licenced version (about GB £10) of Forscan to adjust mileage upwards but not down. Good point, I was forgetting about the extended licence part. 2 Quote Link to comment Share on other sites More sharing options...
Redenez Posted September 28, 2021 Share Posted September 28, 2021 Great !! The new cluster is lower mileage ... i will use Forscan with licence . Thanks guys. I appreciate it 1 Quote Link to comment Share on other sites More sharing options...
viilkas Posted October 18, 2021 Share Posted October 18, 2021 Sorry for bumping an old thread but today I tried to change my mileage using JW's foccus software and after reading from bcm and writing to ipc both bcm and ipc tabs came up empty and I didn't understand why, any suggestions? Quote Link to comment Share on other sites More sharing options...
jlawes20389 Posted October 18, 2021 Share Posted October 18, 2021 I may be misunderstanding what you're attempting to do because if you are reading the bcm and then writing to the IPC, to me that sounds like you are reading the central config from the bcm and writing it to the IPC. If that is what you're doing then this is unrelated to the actual mileage adjustment. It is recommended to do as the IPC stores a backup of the central configuration in the bcm so reading from the bcm and writing to the IPC ensures that they are matching should the backup in the IPC be needed. The mileage adjustment is simply by pressing the write button under odometer in your first screenshot. Be aware that you need to input the desired mileage in kilometres instead. The IPC can also only be adjusted upwards so if you're new one has more miles on it than your old one, you can't adjust it down with Focccus. 1 Quote Link to comment Share on other sites More sharing options...
viilkas Posted October 19, 2021 Share Posted October 19, 2021 12 hours ago, jlawes20389 said: I may be misunderstanding what you're attempting to do because if you are reading the bcm and then writing to the IPC, to me that sounds like you are reading the central config from the bcm and writing it to the IPC. If that is what you're doing then this is unrelated to the actual mileage adjustment. It is recommended to do as the IPC stores a backup of the central configuration in the bcm so reading from the bcm and writing to the IPC ensures that they are matching should the backup in the IPC be needed. The mileage adjustment is simply by pressing the write button under odometer in your first screenshot. Be aware that you need to input the desired mileage in kilometres instead. The IPC can also only be adjusted upwards so if you're new one has more miles on it than your old one, you can't adjust it down with Focccus. I didnt find the exact method of doing it and some people in previous pages mentioned to read the bcm and write to ipc. So even if the IPC tab is empty I should put the desired mileage and then hit Read? Quote Link to comment Share on other sites More sharing options...
jlawes20389 Posted October 19, 2021 Share Posted October 19, 2021 If you press read, that should show the current mileage of the odometer. To change it, type the desired amount in KM in the box and press write. 1 Quote Link to comment Share on other sites More sharing options...
viilkas Posted October 21, 2021 Share Posted October 21, 2021 On 10/19/2021 at 10:08 AM, jlawes20389 said: If you press read, that should show the current mileage of the odometer. To change it, type the desired amount in KM in the box and press write. I just plugged it back in and didnt do anything else besides clicking read below odometer and then set after changing the number to my desired mileage, thanks very much managed to correct the mileage without spending a fortune 😁 Quote Link to comment Share on other sites More sharing options...
Eri789 Posted August 7, 2022 Share Posted August 7, 2022 Ciao ragazzi ho fatto l'upgrade dell software dell IPC alla versione mk3.5 pero mi ritrovo con un problema dopo diversi accendi e spegni della machina l'IPC azzera i valori temporanei(chilometri,durata della mercia, consumi ecc) qualcuna mi puo aiutare per favore Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.