OPLxx Posted June 5, 2017 Share Posted June 5, 2017 Oh my god I think I'm in love :O 1 Quote Link to comment Share on other sites More sharing options...
D13 HPD 95 Posted June 7, 2017 Author Share Posted June 7, 2017 So not had a great day, moved the number plate to the bonnet, will get a photo, also new wheel nuts fitted and also engine cover relocation studs from Boomba fitted, toke delivery of the new splitter and spoiler extension, also removed the slam panel cover it had stuck onto it and then decided to remove the wing ST badges and my day got worse this happened -.- Yep that's all the loverly laquer that was on the wing now removed and possible an expensive repair coming my way next week, booked into a paint and repair place for Tuesday so will see what the damage is going to be then not my day -.- Quote Link to comment Share on other sites More sharing options...
D13 HPD 95 Posted June 7, 2017 Author Share Posted June 7, 2017 New front end, plate location I know I think it's not on straight -.- Quote Link to comment Share on other sites More sharing options...
b4zz Posted June 8, 2017 Share Posted June 8, 2017 liking where the p[late is and not good with the paint trouble hope its not that expensive for you Quote Link to comment Share on other sites More sharing options...
Jonro2009 Posted June 11, 2017 Share Posted June 11, 2017 I'm going out on a limb here but I don't think the positioning of your plate was illegal, I'd say the new position is potentially more of an issue. The regs say "in such a position that in normal daylight the characters of the registration mark are easily distinguishable from every part of a relevant area having the diagonal length specified in paragraph (4)". I'd say that it fits that, unless they are standing at the extreme left of the car as you look at it. It says something about bumpers having mounting points/spaces for plates and where they do not you just have to meet the above criteria. Where the plate is sitting (wonky [emoji6]) now, doesn't comply with the following "vertically or, where that is not reasonably practicable, in a position as close to the vertical as is reasonably practicable," you could argue it is not reasonably practicable because of your choice of plate, not lack of space.Anyway, for me the plate doesn't look right where it is now, it looked much better on the corner of the bumper but that's just my opinion. Your car is coming along amazingly, I've been away for a while so haven't kept up. Big changes have been done and are still coming [emoji16]Sent from my iPad using Tapatalk Quote Link to comment Share on other sites More sharing options...
D13 HPD 95 Posted June 12, 2017 Author Share Posted June 12, 2017 Cheers Jonro, I've re-ordered another plate 😂 But am going to use the Bespooked removable and reusable plate solution system, so I'm going to put it on the drivers side so should be visible to all incoming traffic if I get pulled for it again I'll pull it off hand it to them and ask them where they'd like it to sit 😂 Yh there's been a few changes, a couple more to come ;) the cars in the paint shop tomorrow to be repaired and have some alterations shall we say and there will be plenty of photos when I get her back but doubt it will be for a few or two 1 Quote Link to comment Share on other sites More sharing options...
Jonro2009 Posted June 13, 2017 Share Posted June 13, 2017 I've not seen the bespoked plate solution before. Looks really good. It didn't look like the plates have been stamped, are they road legal? I'd be frightened of someone pinching them lol. My car is in the paint shop tomorrow too. I have a scratch on the NSF wing, gutted! Looking forward to seeing your photos! I'm intrigued Sent from my iPad using Tapatalk Quote Link to comment Share on other sites More sharing options...
b4zz Posted June 14, 2017 Share Posted June 14, 2017 On 12/06/2017 at 0:55 PM, D13 HPD 95 said: Cheers Jonro, I've re-ordered another plate 😂 But am going to use the Bespooked removable and reusable plate solution system, so I'm going to put it on the drivers side so should be visible to all incoming traffic if I get pulled for it again I'll pull it off hand it to them and ask them where they'd like it to sit 😂 Yh there's been a few changes, a couple more to come ;) the cars in the paint shop tomorrow to be repaired and have some alterations shall we say and there will be plenty of photos when I get her back but doubt it will be for a few or two cant wait to see the pics when its back and see if I can spot the changes Quote Link to comment Share on other sites More sharing options...
D13 HPD 95 Posted June 28, 2017 Author Share Posted June 28, 2017 Picked her up last night ;) have a shed full of things to play with soon! A few things done - new splitter, side skirt splitter, front plastics gloss black, rear spoiler extension, wing repaired, crash bar painted, wing mirrors painted Quote Link to comment Share on other sites More sharing options...
D13 HPD 95 Posted June 28, 2017 Author Share Posted June 28, 2017 Hmm which tail lights to get 🤔 Quote Link to comment Share on other sites More sharing options...
kpg Posted June 28, 2017 Share Posted June 28, 2017 Top ones 1 Quote Link to comment Share on other sites More sharing options...
Jonro2009 Posted June 29, 2017 Share Posted June 29, 2017 Do you have any shots standing straight on to the front and also from the rear? It looks awesome!! Now I know it's me but I can not see what the lights look like, I don't really know quite what I'm looking at lolSent from my iPad using Tapatalk Quote Link to comment Share on other sites More sharing options...
b4zz Posted June 29, 2017 Share Posted June 29, 2017 looking good mate very btcc. as for the lights I would say top ones too. is your spoiler lip just been put on with the supplied 3m tape or is it bonded on? Quote Link to comment Share on other sites More sharing options...
D13 HPD 95 Posted June 29, 2017 Author Share Posted June 29, 2017 I picked the car up Tuesday night and then got it home and had to drive up north for a training course with work so only grab the photos I have above, I'm home tomorrow and hopefully if the sun is shining or at least not raining I'll be playing with some new bits and will get plenty of photos :) and it's with the 3M tape mate plenty strong enough! And cheers for the feedback on the lights, just want them to be nice and black and glossy the top ones just don't look glossy if you get me? I'll ask the seller and see if he has more photos :) Quote Link to comment Share on other sites More sharing options...
D13 HPD 95 Posted June 29, 2017 Author Share Posted June 29, 2017 24 minutes ago, b4zz said: looking good mate very btcc. as for the lights I would say top ones too. is your spoiler lip just been put on with the supplied 3m tape or is it bonded on? I do like the BTCC look but when I showed the other half the rear spoiler you can get which is a copy of the BTCC one she said are you hell as like getting that, so she's normally not ever bothered about what I do to the cars but she put her foot down on that one 😂 For now 😜😉 2 Quote Link to comment Share on other sites More sharing options...
D13 HPD 95 Posted June 29, 2017 Author Share Posted June 29, 2017 Well got home early from work today so... this little lot happened 😎 Latch covers from China CP gels Paint Modz header tank cover!! New boost solenoid valve, if I can get a video tomorrow I will sounds insane Some little CP logos on the mudflaps front went on square and rears are at an angle so you can see them Instagram this logo #D13 HPD gel New left old right big difference Both new lights #next level This is how she's left for tonight until more time spent on here tomorrow!! God she needs a clean 1 Quote Link to comment Share on other sites More sharing options...
b4zz Posted June 30, 2017 Share Posted June 30, 2017 23 hours ago, D13 HPD 95 said: I picked the car up Tuesday night and then got it home and had to drive up north for a training course with work so only grab the photos I have above, I'm home tomorrow and hopefully if the sun is shining or at least not raining I'll be playing with some new bits and will get plenty of photos :) and it's with the 3M tape mate plenty strong enough! And cheers for the feedback on the lights, just want them to be nice and black and glossy the top ones just don't look glossy if you get me? I'll ask the seller and see if he has more photos :) cheers for the reply in regards to your spoiler lip.hopefully once the weather drys up I will see about getting mine put on. loving the latch covers mate great touch would you know if these will fit a mk2 facelift? or have you got the link to the buyer you bought them from by any chance please? yea looked at the pics of the lights and see what you mean about them looking shiney. might be worth contacting the seller like you said just to get a few more pics mate. im sure the other half will come around to the new spoiler just have to bribe her with some thing nice lol Quote Link to comment Share on other sites More sharing options...
D13 HPD 95 Posted June 30, 2017 Author Share Posted June 30, 2017 I got them from Ali express I'll try and find a link for you, and I'm pretty sure they would the latches seem a pretty common size if I'm honest, yh I'll email them and see what they say hopefully get some nice clear photos fitted, I'm not to sure about the spoiler haha talked about going hybrid turbo and she wasn't bothered showed her the BTCC spoiler after talking about turbos and she went mental haha something about she ain't being seen in Sainsbury's doing the shop with that on it 😂 Haha done a few more hits today, pro alloy charge pipe kit installed omg what a faffffff to get on and getting it to sit in the right place nearly gave up if it wasn't for the fact I wouldn't have any pipes connecting the turbo to anywhere 😂 Didn't get many photos of that install tho, just a change from 53mm pipe to 67mm all the way through no restrictions plenty of more cooler air to play with ;) and installed my halos from CEUK brilliant kit highly recommend them!! Off on They are really bright in daylight, photo doesn't show it but I'll get one at night later to really show them off ;) needs a clean which will be Tuesday job, then a full detail on Friday as she's being used as a Prom travel car :) waiting for a silicon reducer to install my oil catch can from Steeda that I had to take off due to the pipes supplied calasoped under pressure -.- and also a strut brace while I have all the panels off :) busy day Tuesday should be ;) also a little info after installing the boost solenoid valve the revs holds really well, the boost is smooth and lot quicker, changing gear and letting off the throttle creates a loverly turbo flutter and still pulls as hard as ever, straight to 3/4 on the bar dial and holds there through all gears doesn't drop one bit love it!! Quote Link to comment Share on other sites More sharing options...
Philf1 Posted June 30, 2017 Share Posted June 30, 2017 You got a link for those latch covers I like them a lot Sent from my iPhone using Tapatalkwww.tomholroydphotography.co.uk Quote Link to comment Share on other sites More sharing options...
Stoney871 Posted June 30, 2017 Share Posted June 30, 2017 For info-The mk2/2.5 latch covers and mk3/3.5 are different.I put black ones on my mk2 and have carbon pattern ones on my ST.Sent from my SM-G930F using Tapatalk Quote Link to comment Share on other sites More sharing options...
Stoney871 Posted June 30, 2017 Share Posted June 30, 2017 http://www.ebay.co.uk/itm/162311641817http://www.ebay.co.uk/itm/181990201231Sent from my SM-G930F using Tapatalk Quote Link to comment Share on other sites More sharing options...
Stoney871 Posted June 30, 2017 Share Posted June 30, 2017 http://www.ebay.co.uk/itm/162328370993Sent from my SM-G930F using Tapatalk Quote Link to comment Share on other sites More sharing options...
D13 HPD 95 Posted June 30, 2017 Author Share Posted June 30, 2017 Some night time photos of the halos Quote Link to comment Share on other sites More sharing options...
b4zz Posted July 1, 2017 Share Posted July 1, 2017 loving the halos fella very nice. Where they hard to fit? cheers for the links and info stoney its much appreciated 1 Quote Link to comment Share on other sites More sharing options...
D13 HPD 95 Posted July 1, 2017 Author Share Posted July 1, 2017 2 hours ago, b4zz said: loving the halos fella very nice. Where they hard to fit? cheers for the links and info stoney its much appreciated not at all, remove the fog light bezzels, fit into place with tape route the wiring and secure into place plug all together and insulate the connectors and connect to the battery, if you walk away from them and go out of bluetooth range they turn off and turn off after locking the car if you wait 10mins, plus you can still be connected to the radio play music and control the colour from the app controlling them :) Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.50f5b8e141ff7bd16447b7cd27cbd908.jpg)
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.