Tezza Posted July 27, 2013 Share Posted July 27, 2013 You will need a new BT module the USB leads and the USB port that's located next to your aux input if you want it to look factory fit Quote Link to comment Share on other sites More sharing options...
calvey88 Posted July 27, 2013 Share Posted July 27, 2013 Thank you. Do you have any idea of the part numbers so I can track these parts down? Quote Link to comment Share on other sites More sharing options...
FR0ST13 Posted July 29, 2013 Share Posted July 29, 2013 Thank you. Do you have any idea of the part numbers so I can track these parts down? Read the whole thread mate, usually helps =P Page 1 & 5 I believe is what your after. iNath outlines the Finis numbers on page 1 and the correct module you need on page 5. Quote Link to comment Share on other sites More sharing options...
Sparticate Posted July 30, 2013 Share Posted July 30, 2013 Hi There are modules appearing with serials that are like the following: CS7T-14D212-ACCan anyone shed any information as to whether it would be suitable? Quote Link to comment Share on other sites More sharing options...
FR0ST13 Posted August 17, 2013 Share Posted August 17, 2013 Hey all, I bought these to fit to my Fiesta but its a 2009 and the loom is different.. epic fail but there you go. I would recommend these parts to anyone with a 2010 Fiesta onwards. Selling these bits as follows. Ford bluetooth USB Voice Module 8M5T-19C112-AP - £95 posted Fiesta Mk7 2010 USB Loom - £50 posted USB Port - £6 posted (The one in the first image is the wrong one, replaced with correct part in second image) USB/AUX Facia - £4 posted All together £150 posted (I would rather sell as a set, it will also be useful for someone and save them time) These are all new apart from the module. Thanks Quote Link to comment Share on other sites More sharing options...
Galaxis Posted August 18, 2013 Share Posted August 18, 2013 You have a PM FROST13 Galaxis Quote Link to comment Share on other sites More sharing options...
FR0ST13 Posted September 2, 2013 Share Posted September 2, 2013 Ok so, Mr.Galaxis has bought my module, I still have the following - Fiesta Mk7 2010 USB Loom - £50 posted to UK USB Port - £6 posted to UK (The one in the first image is the wrong one, replaced with correct part in second image) USB/AUX Facia - £4 posted to UK Cheers, ^_^ 1 Quote Link to comment Share on other sites More sharing options...
Galaxis Posted September 2, 2013 Share Posted September 2, 2013 And Galaxis is happy :) Thx to mr.Frost13 :))) Quote Link to comment Share on other sites More sharing options...
iNath Posted September 2, 2013 Share Posted September 2, 2013 USB/AUX Facia - £4 posted to UK Cheers, ^_^ Me please! Quote Link to comment Share on other sites More sharing options...
Tezza Posted September 2, 2013 Share Posted September 2, 2013 Their cheap from fords too :) PANEL - CONSOLE (INTERIOR ENVIRONMENT COLOUR-FLORIDA, WITH A/V JACK AND USB) 1572825 @ £5.36 :) Quote Link to comment Share on other sites More sharing options...
iNath Posted September 2, 2013 Share Posted September 2, 2013 Their cheap from fords too :) PANEL - CONSOLE (INTERIOR ENVIRONMENT COLOUR-FLORIDA, WITH A/V JACK AND USB) 1572825 @ £5.36 :) Ordered it 8 weeks ago and never came in :( Quote Link to comment Share on other sites More sharing options...
FR0ST13 Posted September 10, 2013 Share Posted September 10, 2013 Update on parts left - Fiesta Mk7 2010 USB Loom - £50 posted to UK USB Port - £6 posted to UK (The one in the first image is the wrong one, replaced with correct part in second image) Cheers, Quote Link to comment Share on other sites More sharing options...
Foz_01 Posted October 1, 2013 Share Posted October 1, 2013 Not sure if anyone still watching this thread I've fitted the Sony headunit as first step in this upgrade. Purchased correct BT USB unit Still to get correct wires and USB connection plate Looking back at one of the previous posts ( I think from Lez) it shows the screen after the IDS work done with an orange/ red backlight. My original (lower spec) head unit had orange lighting and orange baklit screen also, the Sony headunit and the screen I've fitted have a white/ ice blue tiny lighting. On previous Sony CD headunits I've fitted on older cars I've had, they had the option of changing the colour of the lighting both on the unit buttons and on screen. Does anyone know if this is the case with the Sony headunit for the fiesta? It is just with the lighting in the fiesta IMHO the red/ orange backlighting would tie in better with the existing lighting already fitted Thanks in advance Quote Link to comment Share on other sites More sharing options...
iNath Posted October 1, 2013 Share Posted October 1, 2013 Only way to change colour is to replace screen with a red one. Quote Link to comment Share on other sites More sharing options...
Foz_01 Posted October 1, 2013 Share Posted October 1, 2013 Cheers iNath, Hmm not sure ill bother then as the buttons on the Sony unit would still glow white I'm not sure how well it would work but if someone did fancy changing the colour of the screen a cheap option would be to remove the plastic sheet (LCD screen protector) from the screen unit and lightly spray the inside face with glass paint. Off topic, I've done this on fluorescent strips for fish tanks in the past. Seriously though I would only try this if u are very confident or have a spare that can be spared. Quote Link to comment Share on other sites More sharing options...
Foz_01 Posted October 1, 2013 Share Posted October 1, 2013 Same topic, just, but different part I know some on here have changed the secret compartment to a drop down door, on the hinged version of the compartment cover. My fiesta has the newer all clipped cover. 2 questions; 1) does anyone know if the cover can be swapped to the version with the hinge without also changing the heater matrix facia cover/ surround? 2) does anyone know/ can u see on the reverse of one that's been converted to drop down, the part number, because fordparts can't identify it from my part number and look for an older version of same part, so have asked for the part number. Thanks again guys 😀 Quote Link to comment Share on other sites More sharing options...
Tezza Posted October 1, 2013 Share Posted October 1, 2013 what part number did you give to your dealer ? Quote Link to comment Share on other sites More sharing options...
Foz_01 Posted October 2, 2013 Share Posted October 2, 2013 FROST are these parts universal in which modukes they connect to? Fiesta Mk7 2010 USB Loom - £50 posted to UK USB Port - £6 posted to UK (The one in the first image is the wrong one, replaced with correct part in second image) Quote Link to comment Share on other sites More sharing options...
Foz_01 Posted October 2, 2013 Share Posted October 2, 2013 Tezza My request to fordparts was "The part I was looking for was an older version of; 8A61-A045N56 AFW Bezel-IP-CENTER STACK UPPER" And I explained that the one I have has clips where older one has a hinge onton the heater matrix facia cover No joy though unless I can quote part number for older hinged version Quote Link to comment Share on other sites More sharing options...
iNath Posted October 2, 2013 Share Posted October 2, 2013 You can't swap the clipped version for hinged one as you don't have the hinges for it to hook on to, and they're part of the dash behind the cover. There are 2 USB looms so it depends which model module you have. Quote Link to comment Share on other sites More sharing options...
FR0ST13 Posted October 2, 2013 Share Posted October 2, 2013 FROST are these parts universal in which modukes they connect to? Fiesta Mk7 2010 USB Loom - £50 posted to UK USB Port - £6 posted to UK (The one in the first image is the wrong one, replaced with correct part in second image) Hey mate, It will fit the following modules as listed by iNath. 85MT-19C112-AR / AS / AT These as far as I'm aware are the newer Mini-USB connection modules. The lead I have will fit them - the other part numbers listed earlier in this thread by iNath are what I used and will be what your looking for if your looking to add it to a 2010 model Fiesta and onwards. I have a 2009 model Fiesta, hence why I'm selling the bits - you need the USB connector as it clips to the facia where your singular AUX port is (You will need the AUX & USB Facia) Cheers dude, Quote Link to comment Share on other sites More sharing options...
Foz_01 Posted October 2, 2013 Share Posted October 2, 2013 I have bought (although still waiting delivery) Module 8M5T-19C112-AT So that looks like it should work Fiesta is 2011 so all should be ok from instructions we have on here?? If that's case tell me how to pay you and ill have both. I guess then only the facia plate for USB and aux to get 😀😀🙏🙏 Quote Link to comment Share on other sites More sharing options...
FR0ST13 Posted October 2, 2013 Share Posted October 2, 2013 Yeah should be this part number - 1572824 Cheers dude, Quote Link to comment Share on other sites More sharing options...
Foz_01 Posted October 2, 2013 Share Posted October 2, 2013 Frost, how do u want me to arrange to pay you for the module loom and the USB connection wiring? Let me know and ill get payment to you ASAP 😀 Quote Link to comment Share on other sites More sharing options...
Tezza Posted October 2, 2013 Share Posted October 2, 2013 The wiring for the module are as follows 1580659 03/11/2008 to 11/07/2009 1580659 @ £128.99 1678395 07/11/2009 to 21/06/2010 @ £68.36 1755525 31/01/2011 onwards @ £49.04 USB port 1715190 @ £6.00 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.