Brigante Posted April 11, 2013 Author Share Posted April 11, 2013 automation systems engineer :) well done mate wanna get me a job lol? Quote Link to comment Share on other sites More sharing options...
vince_13 Posted April 11, 2013 Share Posted April 11, 2013 cheers m8, Yh the mat was too long, I've had to pull it back now Quote Link to comment Share on other sites More sharing options...
Brigante Posted April 11, 2013 Author Share Posted April 11, 2013 cheers m8, Yh the mat was too long, I've had to pull it back now i had the same problem mate with the mats that the previous owner had in the car thats the problem with universal fit mats, they dont fit lol dangerous really cause my clutch pedal got jammed down on it a few times which is why i got these tailored mats which are brilliant if you look at the driverside photo you'll see how the mats a lot shorter than the passenger, so it doesnt protude up behind the pedals. it also clips in place so theres no chance of it slipping they only cost 11quid posted as well so they are a right bargain Quote Link to comment Share on other sites More sharing options...
Preee Posted April 11, 2013 Share Posted April 11, 2013 Fantastic work Brigane , keep up the Mods m8 Quote Link to comment Share on other sites More sharing options...
DanGersFord Posted April 11, 2013 Share Posted April 11, 2013 cause its not an st mate lol, don't think i'd even fit st badges if i had the front bumper, skirts n alloys would just look silly putting st badges on it now cause most of it is still ghia Theres plenty of other badges lol just used st as an example lol Quote Link to comment Share on other sites More sharing options...
Brigante Posted April 11, 2013 Author Share Posted April 11, 2013 Fantastic work BriganTe , keep up the Mods m8 Nice one Preee mate It's a bit of a slow progress but it's getting there Quote Link to comment Share on other sites More sharing options...
Brigante Posted April 11, 2013 Author Share Posted April 11, 2013 Theres plenty of other badges lol just used st as an example lol lol i know mate, what other badges did you have in mind? i know theres chrome badges that say focus etc that replaces the indicator lens that i mentioned in me guide but i didnt wanna pay that much for em when i don't even like chrome lol already had all the paint laying around spare anyway so i just colour coded em Quote Link to comment Share on other sites More sharing options...
b4zz Posted April 14, 2013 Share Posted April 14, 2013 liking the progress fella it looking good so far. know what you mean about funds i got loads of ideas for mine lol but no cash pmsl Quote Link to comment Share on other sites More sharing options...
jeebowhite Posted April 17, 2013 Share Posted April 17, 2013 some nice mod's on there mate! plenty of idea's I can ill afford :) it looks good though! Quote Link to comment Share on other sites More sharing options...
Brigante Posted April 18, 2013 Author Share Posted April 18, 2013 Nice one jeebo I aint done much really, just the odd cheap stuff I've got me next big mod in the pipeline which I will hopefully get out the way next week n then I've just got a last few little touches to get out the way which I think will be as far as I wanna go with the build Quote Link to comment Share on other sites More sharing options...
Brigante Posted April 28, 2013 Author Share Posted April 28, 2013 got a few little mods out the way, fitted some universal mud flaps, they was a bit long though n needed a chunk hacking off the front flaps cause they was sitting to low and couldnt reverse out the drive without em scraping i've also sprayed the front fog surrounds in gloss black and flyeyed the front fog units themselves. will also be doing the rear fog surrounds in gloss black too i personally think it improves the front making it look more stealthy n making the most of the horrible front bumper as much as i can. i really dont like that the standard mk2 front bumper doesnt have a proper lower grill like the 2.5 just need to do summin about the grey trim of the bottom of the bumper now, may take it off at some point to colour code or fit an ms lip as i dont think i'll be fitting an st front bumper few more shots 1 Quote Link to comment Share on other sites More sharing options...
MattyD Posted April 30, 2013 Share Posted April 30, 2013 HI charlie, Just read through all your mods and i like what you've done. Nothing to serious but some nice subtle mods youve got going on. Uve given me some ideas for mine aswell now lol ;) Quote Link to comment Share on other sites More sharing options...
b4zz Posted April 30, 2013 Share Posted April 30, 2013 looking good and like the fly eye fogs Quote Link to comment Share on other sites More sharing options...
Brigante Posted May 3, 2013 Author Share Posted May 3, 2013 weather seems to be getting better so i thought i'd start hydro dipping again started off with me garage door, and to my surprise it actually went completely perfect and looked beautiful.. ..and then i went n dropped it :o was trying to wipe some of the sticky gunk from around the sides n it slipped out my hand so now theres a few minor imperfections and one big patch missing from where i tried to touch a little thing up n ended up taking more of the print off <_< anyway here it is not finished yet as i'd just put another clear coat on it just before taking the photo so its still wet all being well i might actually dip the rest of me parts over the weekend Quote Link to comment Share on other sites More sharing options...
Brigante Posted May 3, 2013 Author Share Posted May 3, 2013 oh and i also decided to spray the rear fog surrounds gloss black to match the front fogs Quote Link to comment Share on other sites More sharing options...
b4zz Posted May 4, 2013 Share Posted May 4, 2013 looking good fella and like the look of the fogs. Quote Link to comment Share on other sites More sharing options...
Brigante Posted May 6, 2013 Author Share Posted May 6, 2013 right so after much much faffing about, sanding, priming, basecoating and dip my interior parts, only for it to be almost impossible to get a perfect finish and something some how always going wrong, as well as the amount of mess to clean up adfter each dip n how hard the stuff is to scrub off i've decided to complately scrap doing to interior in carbon fibre for now and instead i'm gonna spray all my interior trim pieces in gloss black instead photos to follow once its all sprayed Quote Link to comment Share on other sites More sharing options...
Brigante Posted May 9, 2013 Author Share Posted May 9, 2013 After a lot more faff than i bargained for, the next little mod is out the way I've fitted an additional 12v supply in the dash storage compartment (thanks to Clive for kindly supplying the extra socket and loom) So now I can stow away all the wiring for my satnav So now instead of having a long wire trailing over the dash down to my garage door infront of the gearstick, it all goes tidily away in the top of the dash It works a treat but my god what a right unexpected faff, didnt realize it would be so much hassle Is this something anyone would want a guide writing up about? Quote Link to comment Share on other sites More sharing options...
vince_13 Posted May 9, 2013 Share Posted May 9, 2013 Wow It is neat, wish I was lucky enough to have a compartment on my dash Quote Link to comment Share on other sites More sharing options...
Stoney871 Posted May 10, 2013 Share Posted May 10, 2013 Glad to be of help again mate. A guide is always useful. Quote Link to comment Share on other sites More sharing options...
Brigante Posted May 10, 2013 Author Share Posted May 10, 2013 Glad to be of help again mate. A guide is always useful. Nice one again mate, you've supplied parts for 2 of my mods now. Damn decent of you. Next time I'm about the devon and cornwall area i'll buy you a whiskey ;) I'll take a few more photos and write the guide up Quote Link to comment Share on other sites More sharing options...
Stoney871 Posted May 10, 2013 Share Posted May 10, 2013 Hey, i'm just a run of the mill generous type of guy. Shame i can't find any more of those patch cables, they are a handy bit of kit. If i could find the correct sockets i reckon they'd be pretty easy to knock up though. Anytime you get near the South West you're more than welcome to buy me a drink (or three) ;) Quote Link to comment Share on other sites More sharing options...
Brigante Posted May 10, 2013 Author Share Posted May 10, 2013 well your generosity appreciated uncle i reckon the patch could be mocked up easy enough just with some bayonet connectors and a short length of wire going into a long length or even just splicing directly into the existing loom the patch certainly does make it easier though the guides up now anyway so have a read when you can lol 3 jd's it is then mate just need a reason to be down that way now 1 Quote Link to comment Share on other sites More sharing options...
Stoney871 Posted May 10, 2013 Share Posted May 10, 2013 ROAD TRIIIIIPP!! :p Quote Link to comment Share on other sites More sharing options...
Brigante Posted June 7, 2013 Author Share Posted June 7, 2013 Allo dudes & dudettes.. Not been on here much as of late due to working 12hr nightshifts and not posted much progress lately due to not having time to do any But in between getting what little sleep I can and working I gave the car a rather quick and not very thorough jetwash and detail Got a nice mirror like shine as you can see here though You'll notice a bit of continuity between my display photo and these as my fro appears to have disappeared.. And I'm also about to get another mod out the way now its been delivered Heres a clue as to what it is Swish :) So watch this space Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.