zain611 Posted January 27, 2018 Share Posted January 27, 2018 Doesn't look bad. As you have a red car black decals would stand out. Next thing I'm hoping of doing is getting the car remapped from 90 to 120hp and 205nm to 275nm. The previous owner said the car had a mountune remap but later found out it hadn't. Quote Link to comment Share on other sites More sharing options...
Gommy Posted January 27, 2018 Author Share Posted January 27, 2018 13 minutes ago, zain611 said: Doesn't look bad. As you have a red car black decals would stand out. Next thing I'm hoping of doing is getting the car remapped from 90 to 120hp and 205nm to 275nm. The previous owner said the car had a mountune remap but later found out it hadn't. Thats my plan to keep it only black and red, and not vary out to any colours. However got a few ideas for stickers around the car. Yeah Remap is also on my list in the future. Quote Link to comment Share on other sites More sharing options...
Gommy Posted January 30, 2018 Author Share Posted January 30, 2018 Induction kit has just arrived, very speedy delivery by Sico Developments. Will fit this tonight and get some videos. 1 Quote Link to comment Share on other sites More sharing options...
Gommy Posted January 30, 2018 Author Share Posted January 30, 2018 Gel rings fitted: 1 Quote Link to comment Share on other sites More sharing options...
Gommy Posted January 30, 2018 Author Share Posted January 30, 2018 Old filter: New Sico Development Induction kit: 1 Quote Link to comment Share on other sites More sharing options...
zain611 Posted January 30, 2018 Share Posted January 30, 2018 Does look good. I like the red interior light shining over the red gel overlays. Any difference in sound? Quote Link to comment Share on other sites More sharing options...
Gommy Posted January 30, 2018 Author Share Posted January 30, 2018 1 hour ago, zain611 said: Does look good. I like the red interior light shining over the red gel overlays. Any difference in sound? Cheers and yeah I liked that effect too! I didn’t film as we fitted it, it started pouring down with rain, so will get one tomorrow. Definately, sounded more husky in the exhaust, didn’t sound so flat. Quote Link to comment Share on other sites More sharing options...
Gommy Posted January 31, 2018 Author Share Posted January 31, 2018 Front/Rear/Wheel and EcoBeast Gel badges now fitted, and fitting the Headlight stickers and S badge tonight. will grab some pictures when I’m home. Quote Link to comment Share on other sites More sharing options...
Gommy Posted February 1, 2018 Author Share Posted February 1, 2018 Update on latest Upgrades; not so great quality photos, its ***** freezing tonight!! Fiesta Rear Window Sticker: Ford Gel badge Front/Rear/Steering Wheel: Wheel Badges (Slightly come off cleaning, but stuck on fully after): CP badge inside: EcoBeast Badge: My favourite.. Headlight Stickers: 2 Quote Link to comment Share on other sites More sharing options...
zain611 Posted February 2, 2018 Share Posted February 2, 2018 Like the headlight decal. Fits perfectly around the headlights. 👍 yeah the weather is getting colder. Was standing outside yesterday cleaning off small white drops which looked like bird mess and it was freezing. Have you seen these door lights autobeam are going to release. I might get them but I'm planning first to get some zetec s door sill protectors Quote Link to comment Share on other sites More sharing options...
Gommy Posted February 2, 2018 Author Share Posted February 2, 2018 Yeah, got the headlight covers to buy next to give the car a meaner look. Im looking to get the Sill lights just watching a few videos the wiring confuses me a bit! Wind deflectors should be here next Monday, plus a couple more stickers and the Boot light to be Red. —- P.S - I will eventually get a video for everyone on the exhaust/induction kit just so cold at night, and not much time on the weekends currently. Quote Link to comment Share on other sites More sharing options...
Gommy Posted February 2, 2018 Author Share Posted February 2, 2018 Next Upgrades on the way - Turbosmart Ford Fiesta 1.0 EcoBoost | Kompact Dual Port Valve: Pro Hoses Secondary Induction Hose for 1.0 EcoBoost (In Red): AIRTEC Alloy Top Induction Pipe for Fiesta 1.0 EcoBoost: Quote Link to comment Share on other sites More sharing options...
Gommy Posted February 3, 2018 Author Share Posted February 3, 2018 Wind Deflectors fitted and look brilliant from Team Heko, will get a picture tomorrow if its not raining. -- The guy whos going to fit the blow off valve has offered a remap for £230 with an increase of 30BHP, for anyone with knowledge on remaps, is that good value for that gain? Quote Link to comment Share on other sites More sharing options...
zain611 Posted February 4, 2018 Share Posted February 4, 2018 That's not too bad. The company I'm looking at will add 30hp to the 1.6 tdci engine. I'm not too sure about if that's save as different engines have different save power limits. Also is there reviews of people using this company just so you know its okay. Quote Link to comment Share on other sites More sharing options...
Gommy Posted February 4, 2018 Author Share Posted February 4, 2018 6 minutes ago, zain611 said: That's not too bad. The company I'm looking at will add 30hp to the 1.6 tdci engine. I'm not too sure about if that's save as different engines have different save power limits. Also is there reviews of people using this company just so you know its okay. Yeah they have plenty of reviews with 90% 5 star the rest 4, they’ve also offered a deal with the blow off install and remap to be £280 all together which I’m gonna accept, get it all done in one go. Quote Link to comment Share on other sites More sharing options...
zain611 Posted February 4, 2018 Share Posted February 4, 2018 Do look into it just incase. I can't remember but u think I heard these engines have overheating issues and it might be good to get a bigger intercooler. I can't remember for certain. Also might wire in the halos today. Quote Link to comment Share on other sites More sharing options...
Gommy Posted February 4, 2018 Author Share Posted February 4, 2018 Just some little upgrades for now, most engine upgrades etc will be done this week. Wind Deflectors (Which are the best so far) - I have 3mm red tape coming for the deflectors this week too for a better look: S badge - The pumaspeed has been wounded and split on the motorway, will be removing and getting a different front sticker: Probably going to take the Fiesta rear window sticker off and get something better, it was advertised as full size of the window but turned out ridiculously small. Quote Link to comment Share on other sites More sharing options...
Gommy Posted February 4, 2018 Author Share Posted February 4, 2018 Coudlnt help myself but thinking the headlights look a bit strange without these; so got them ordered. Quote Link to comment Share on other sites More sharing options...
zain611 Posted February 4, 2018 Share Posted February 4, 2018 I probably get them colour coded if I got them for my fiesta. Gives the car a meaner look. There's a guy on YouTube I think called B7 TMY who used fly eye tint along with the brows and that looked good. Quote Link to comment Share on other sites More sharing options...
Gommy Posted February 4, 2018 Author Share Posted February 4, 2018 1 hour ago, zain611 said: I probably get them colour coded if I got them for my fiesta. Gives the car a meaner look. There's a guy on YouTube I think called B7 TMY who used fly eye tint along with the brows and that looked good. I'll have a look, il probaby keep them black as ive seen plenty red editions with them in black, looks cool! In time I might re-colour. 1 Quote Link to comment Share on other sites More sharing options...
b4zz Posted February 4, 2018 Share Posted February 4, 2018 loving what you have done and got ready to go on Quote Link to comment Share on other sites More sharing options...
Gommy Posted February 4, 2018 Author Share Posted February 4, 2018 20 minutes ago, b4zz said: loving what you have done and got ready to go on Thanks, plenty more to do yet but coming along nicely Quote Link to comment Share on other sites More sharing options...
Guest Posted February 4, 2018 Share Posted February 4, 2018 Looks good so far Gommy. I will sort that step by step for you eyebrows tomorrow. Need to take some pics but getting dark outside now.Few more ideas for you:Shorter aerial. Front wing gel badges. Maybe upgrade the rear diffuser to the ST one? Quick question, I don't suppose you could send the link to where you got the 3mm red tape. I'd like to do the same to my wind deflectors and also along my diffuser. Quote Link to comment Share on other sites More sharing options...
Gommy Posted February 4, 2018 Author Share Posted February 4, 2018 31 minutes ago, Loftie12 said: Looks good so far Gommy. I will sort that step by step for you eyebrows tomorrow. Need to take some pics but getting dark outside now. Few more ideas for you: Shorter aerial. Front wing gel badges. Maybe upgrade the rear diffuser to the ST one? Quick question, I don't suppose you could send the link to where you got the 3mm red tape. I'd like to do the same to my wind deflectors and also along my diffuser. Thanks! Yeah id appreciate that, trying to do as much as I can myself without taking it to a garage unless it engine upgrades. - Definitely looked into the shorter aerial is it an easy fix? Ive never actually used radio, always use Spotify on my phone lol. - Any links to the gel badges? - Yeah seen the diffuser just wondering how hard it is to fit it! Tape link is here mate: https://www.amazon.co.uk/dp/B0042XXM8S/ref=pe_3187911_189395841_TE_3p_dp_1 Quote Link to comment Share on other sites More sharing options...
zain611 Posted February 4, 2018 Share Posted February 4, 2018 1 hour ago, Gommy said: I'll have a look, il probaby keep them black as ive seen plenty red editions with them in black, looks cool! In time I might re-colour. Yeah that's true I forgot about the red and black look. I've started doing the halos finally. Hopefully will post about it in the evening 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.