zain611 Posted January 30, 2019 Share Posted January 30, 2019 Lol 馃槀聽 Quote Link to comment Share on other sites More sharing options...
Gommy Posted February 10, 2019 Author Share Posted February 10, 2019 H&r 35mm springs now ordered, should have them fitted next weekend and then tracked the following week.聽 Forgot I had a nice 拢25 voucher to use up馃槉 Quote Link to comment Share on other sites More sharing options...
Gommy Posted February 11, 2019 Author Share Posted February 11, 2019 Also couldn't help myself and bought an ITG induction kit off of Facebook as I actually really like the tone of the exhaust right now.. Cannot make my mind up on this car馃槀 Have to say the MPG, even putting your foot down is spot on, saving double than what I did on my red edition.聽 Quote Link to comment Share on other sites More sharing options...
b4zz Posted February 11, 2019 Share Posted February 11, 2019 a saving on fuel is good fella. well on the find with the itg induction kit 1 Quote Link to comment Share on other sites More sharing options...
zain611 Posted February 11, 2019 Share Posted February 11, 2019 Look forward to the induction kit. You'd probably will hear the turbo psh when installed.聽 1 Quote Link to comment Share on other sites More sharing options...
Gommy Posted February 11, 2019 Author Share Posted February 11, 2019 2 minutes ago, zain611 said: Look forward to the induction kit. You'd probably will hear the turbo psh when installed.聽 My mate has an itg on his st and it sounds so good!聽 Here's his ST... Peron stage 1+ 1 Quote Link to comment Share on other sites More sharing options...
Gommy Posted February 19, 2019 Author Share Posted February 19, 2019 Should of updated at the weekend but in love more.. Had the itg induction kit with primary intake fitted and sounds incredible, without a map the flutter and wooosh is so loud!聽 Also had the car lowered by h&r 35mm springs,it's still dropping daily but looks great already!聽 聽 Next weekend (2nd march) I will be swapping wheels with my mate for his Momo Revenge: 1 Quote Link to comment Share on other sites More sharing options...
zain611 Posted February 19, 2019 Share Posted February 19, 2019 Would love to her that dump sound from the induction kit. If I had your car I'd slightly raise the front springs.聽 I think those wheels will look nice 馃憤.聽 1 Quote Link to comment Share on other sites More sharing options...
Gommy Posted February 19, 2019 Author Share Posted February 19, 2019 25 minutes ago, zain611 said: Would love to her that dump sound from the induction kit. If I had your car I'd slightly raise the front springs.聽 I think those wheels will look nice 馃憤.聽 Hopefully get a video this week!聽 The backs haven't dropped enough yet, so will be fine once they do.聽 Love the wheels, and getting them so cheap, I can't resist, Will also be having his Milltek non res at the end of the month.聽 Quote Link to comment Share on other sites More sharing options...
b4zz Posted February 22, 2019 Share Posted February 22, 2019 them wheels are going to look good dude. look forward to the video of your induction kit. loving the lowered look 1 Quote Link to comment Share on other sites More sharing options...
Gommy Posted March 2, 2019 Author Share Posted March 2, 2019 Sorry guys works been mental lately. Haven't got round to a video yet but had the wheels fitted today: 1 Quote Link to comment Share on other sites More sharing options...
Gommy Posted March 2, 2019 Author Share Posted March 2, 2019 Both alloys together, much prefer the Momo Revenge to the standard St wheels: 2 Quote Link to comment Share on other sites More sharing options...
b4zz Posted March 3, 2019 Share Posted March 3, 2019 the new wheels suite the fiesta great. they might just be a bit of a pain to clean with all the spokes on them lol 1 Quote Link to comment Share on other sites More sharing options...
TimST2 Posted March 3, 2019 Share Posted March 3, 2019 10 hours ago, Gommy said: Both alloys together, much prefer the Momo Revenge to the standard St wheels: They're nice wheels, no doubt. For me though the standard wheel is one of the iconic things about the Mk7 ST styling that I wouldn't want to change. Do you know if they're lighter than the standard wheel? 1 Quote Link to comment Share on other sites More sharing options...
Gommy Posted March 3, 2019 Author Share Posted March 3, 2019 13 hours ago, b4zz said: the new wheels suite the fiesta great. they might just be a bit of a pain to clean with all the spokes on them lol Thanks, much prefer them! And havent had a chance because of the weather but they'll take some time to clean haha!聽 13 hours ago, TimST2 said: They're nice wheels, no doubt. For me though the standard wheel is one of the iconic things about the Mk7 ST styling that I wouldn't want to change. Do you know if they're lighter than the standard wheel? Yeah, not by much but they are lighter. And people are 50/50 split between the ST alloys and aftermarket!聽 1 Quote Link to comment Share on other sites More sharing options...
TimST2 Posted March 3, 2019 Share Posted March 3, 2019 29 minutes ago, Gommy said: they'll take some time to clean haha! As long as you use wheel sealant and have a decent wheel brush I'm sure they'll be just fine to keep clean. Quote Link to comment Share on other sites More sharing options...
Gommy Posted March 6, 2019 Author Share Posted March 6, 2019 Unfortunately the wheels won't be staying as I nearly lost my life last night.聽 Driving home from work the car wouldn't steer round a wide bend as the steering went really heavy, started making a loud banging noise at 60 and almost collided with a tree, that I narrowly avoided.聽 Turns out the left front was never properly done up and all 4 nuts could be undone with your hand! I'm shocked!聽 Getting my standards back Saturday.聽 Quote Link to comment Share on other sites More sharing options...
TimST2 Posted March 6, 2019 Share Posted March 6, 2019 Did you use the OEM wheel nuts when the new wheels needed different ones?Sent from my SM-G900F using Tapatalk Quote Link to comment Share on other sites More sharing options...
Gommy Posted March 6, 2019 Author Share Posted March 6, 2019 2 hours ago, TimST2 said: Did you use the OEM wheel nuts when the new wheels needed different ones? Sent from my SM-G900F using Tapatalk 聽 I had the aftermarket ones that were supplied with the Momo Revenge wheels.聽 The oem ones went with my standard wheels which in getting backs Saturday.聽 Quote Link to comment Share on other sites More sharing options...
b4zz Posted March 7, 2019 Share Posted March 7, 2019 18 hours ago, Gommy said: I had the aftermarket ones that were supplied with the Momo Revenge wheels.聽 The oem ones went with my standard wheels which in getting backs Saturday.聽 sounds like they where supplied with the wrong nuts to me? you were very lucky by the sounds of it to have missed the tree. very scary experiance Quote Link to comment Share on other sites More sharing options...
Eric Bloodaxe Posted March 7, 2019 Share Posted March 7, 2019 You mention that you "had the wheels fitted" - could the fitter聽have tightened the wheels incorrectly? Similar thing happened to my brother in law after a main dealer service, found the bolts only finger tight. At least the dealer had the decency to 'fess聽up and refund the cost of the service. Quote Link to comment Share on other sites More sharing options...
TomsFocus Posted March 7, 2019 Share Posted March 7, 2019 2 hours ago, Eric Bloodaxe said: You mention that you "had the wheels fitted" - could the fitter聽have tightened the wheels incorrectly? Similar thing happened to my brother in law after a main dealer service, found the bolts only finger tight. At least the dealer had the decency to 'fess聽up and refund the cost of the service. I had a similar issue after having a pair of wheels balanced at a major chain.聽 The fitter had forgotten to tighten the bolts on one wheel...聽 I lost two bolts on the way home and found the other 2 just hanging on by a thread as I felt the wheel wobbling and pulled over.聽 馃槷 They were also shiny chrome plated bolts...cost me 拢6 each to replace from the dealer 10 years ago!聽 I didn't have the guts to confront the garage about it, but wouldn't have had any proof anyway.聽 I've not used that garage again but taken wheels in loose for tyres or balancing ever since, then fit and torque them myself afterwards...聽 Moral of the story is never trust anyone lol. Quote Link to comment Share on other sites More sharing options...
Gommy Posted March 9, 2019 Author Share Posted March 9, 2019 The wheels are back, in the same condition when they left me and all back to normal and yes I've double and triple checked the nuts!聽 Much prefer the standards now not having them for a week 1 Quote Link to comment Share on other sites More sharing options...
Gommy Posted March 16, 2019 Author Share Posted March 16, 2019 Latest update is...聽 聽 Having a local company coming to fit a cat 1 immobiliser and alarm system to my car on Tuesday, including a dash cam.聽 No mods being spent on as I've just booked a holiday to florida in September, so I'm sure it'll be staying standard for quite a while!聽 Quote Link to comment Share on other sites More sharing options...
STJAY Posted March 18, 2019 Share Posted March 18, 2019 As far as I'm aware, the ST already has a Cat 1 system?聽 I was told it's part of the reason my insurance dropped going to the ST from the Ibiza considering there was 13 insurance groups of a difference? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.