D13 HPD 95 Posted August 16, 2018 Author Share Posted August 16, 2018 11 hours ago, b4zz said: will be waiting too see the updates fella sounds good. and defo not cheap Cheers 🙂 should be here soon hopefully New carbon under bonnet plate fitted need to fit the other two sides but vents hit so need to change vents anyway new carbon washer jets fitted and new DMB England flag fitted physcodelic vinyl looks insane got to do the spoiler sides next 1 Quote Link to comment Share on other sites More sharing options...
b4zz Posted August 17, 2018 Share Posted August 17, 2018 liking the carbon washer jets and is it real or dipped? the flag looks cool Quote Link to comment Share on other sites More sharing options...
D13 HPD 95 Posted August 17, 2018 Author Share Posted August 17, 2018 We tried to carbon skin them, but they delaminated, and because of the fan spray inside them and being heated we couldn’t make a real carbon mould for them as they are just to small 😕 a proper aerospace carbon company could do it but would cost a hell of a lot of money to do so we just carbon dipped them instead nearly the same effect Quote Link to comment Share on other sites More sharing options...
Jonro2009 Posted August 17, 2018 Share Posted August 17, 2018 Where is the flag from? Quote Link to comment Share on other sites More sharing options...
D13 HPD 95 Posted August 17, 2018 Author Share Posted August 17, 2018 2 hours ago, Jonro2009 said: Where is the flag from? DMB graphics 2 Quote Link to comment Share on other sites More sharing options...
b4zz Posted August 18, 2018 Share Posted August 18, 2018 22 hours ago, D13 HPD 95 said: We tried to carbon skin them, but they delaminated, and because of the fan spray inside them and being heated we couldn’t make a real carbon mould for them as they are just to small 😕 a proper aerospace carbon company could do it but would cost a hell of a lot of money to do so we just carbon dipped them instead nearly the same effect they look good mate and different from gloss black of colour coded and the carbon look blends in well with the cars colour 1 Quote Link to comment Share on other sites More sharing options...
D13 HPD 95 Posted August 20, 2018 Author Share Posted August 20, 2018 Test fitted a new toe strap ready for track days and new DMB side spoiler graphics fitted, I quite like the psychodelic effect against the Mag Grey I might get the bits on the front and rear bumper I’m not sure and possible the side door ones will see a few more goodies waiting to turn up first.... 1 Quote Link to comment Share on other sites More sharing options...
b4zz Posted August 20, 2018 Share Posted August 20, 2018 looking good fella. regarding the paint modz dab arial did you just stick it down with the supplied 3m tape or have you used some thing like tiger seal as well just asking as I got the same arial and don't want it coming off once I upgrade my mk2.5 focus Quote Link to comment Share on other sites More sharing options...
D13 HPD 95 Posted August 20, 2018 Author Share Posted August 20, 2018 9 hours ago, b4zz said: looking good fella. regarding the paint modz dab arial did you just stick it down with the supplied 3m tape or have you used some thing like tiger seal as well just asking as I got the same arial and don't want it coming off once I upgrade my mk2.5 focus No mate the 3M tape will never come off unless you heat it up and use glue remover or fishing line to cut it off and clean it up after 1 Quote Link to comment Share on other sites More sharing options...
zain611 Posted August 20, 2018 Share Posted August 20, 2018 I like that 3D effect on those stickers. That's the type of effect I'd like on my number plate. Quote Link to comment Share on other sites More sharing options...
b4zz Posted August 21, 2018 Share Posted August 21, 2018 14 hours ago, D13 HPD 95 said: No mate the 3M tape will never come off unless you heat it up and use glue remover or fishing line to cut it off and clean it up after great thanks and that's good to know. assume the heat we had the other week didn't affect it one bit. Quote Link to comment Share on other sites More sharing options...
D13 HPD 95 Posted August 21, 2018 Author Share Posted August 21, 2018 10 hours ago, b4zz said: great thanks and that's good to know. assume the heat we had the other week didn't affect it one bit. Nope heat hasn’t bothered it at all! Some one say psychedelic? 2 Quote Link to comment Share on other sites More sharing options...
b4zz Posted August 22, 2018 Share Posted August 22, 2018 cheers for that its good to know the heat hasn't affected it. loving the sticker and does go well with the cars colour 1 Quote Link to comment Share on other sites More sharing options...
D13 HPD 95 Posted August 22, 2018 Author Share Posted August 22, 2018 Few more additions today New genuine 3K weave carbon mirror caps are back ready to match the future plans more coming soon... ceramic coated before being fitted of course new carbon rear door plates just to match the fronts and a nice new oil breather cap the Americans rave about these venting any additional block pressure before it gets a chance to go back through to the inlet and fitted some brackets ready for custom bonnet lifter kit, the rams are being customised before fitting 1 Quote Link to comment Share on other sites More sharing options...
b4zz Posted August 23, 2018 Share Posted August 23, 2018 loving the carbon touches fella you must be rich lol. the bonnet vents look cool too. 2 Quote Link to comment Share on other sites More sharing options...
D13 HPD 95 Posted August 24, 2018 Author Share Posted August 24, 2018 Well today’s been fun.... So started out with a simple change the pedal covers for some nice shiny ones like the good old 2000’s max power days that went well and looks good I think adds a nice touch then this started, changing the header tank and replacing a coolant hose which has some damage so stripping it out alot of tools about the place as per new radium tank and coolant hose installed ..... so I thought turns out the bottom connection has a few damaged threads ( unsure how it’s brand new ) and caused all the coolant in the tank to be released on my driveway excellent this was the cause -.- so mishimoto tank back in, luckily I have coolant in the shed (which I now need to get more off) went to fit the summit front upper brace as well with the radium tank and it doesn’t fit that header tank either, so I’ve ordered a new stock plastic header tank from Ford £22 so I can fit the summit brace, and then I found out today Auto Specsalists are being out their own header tank which will allow you to fit the brace as well brilliant -.- all this faffing around and buying two different aftermarket tanks for nothing o ans I lost my stock tank somehow so I had to buy a new one -.- great that’s enough for today I think hopefully it goes better from now on! Quote Link to comment Share on other sites More sharing options...
b4zz Posted August 25, 2018 Share Posted August 25, 2018 im sure things can only get better fella and I hate it when thing don't go to plan does my head right in and pees me off 1 Quote Link to comment Share on other sites More sharing options...
D13 HPD 95 Posted September 1, 2018 Author Share Posted September 1, 2018 Latest mods fitted Tufskinz window trim, roof rail trim, wing mirror and side door window trims fitted real carbon fibre in a flex gel panel with 3M tape to apply them in place followed by some interior cubby hole mats to stop rattles 2 Quote Link to comment Share on other sites More sharing options...
zain611 Posted September 1, 2018 Share Posted September 1, 2018 Like those exterior carbon bits. Think I might wrap that little strip on the roof as mine has gone white with polish. 1 Quote Link to comment Share on other sites More sharing options...
b4zz Posted September 1, 2018 Share Posted September 1, 2018 loving the exterior carbon touches mate. that's one stuning rs you got. where did you get the cubby hole mats from please Quote Link to comment Share on other sites More sharing options...
D13 HPD 95 Posted September 1, 2018 Author Share Posted September 1, 2018 38 minutes ago, b4zz said: loving the exterior carbon touches mate. that's one stuning rs you got. where did you get the cubby hole mats from please Thank you both I got them from Tufskinz as well got a discount code if you’d like it USE CODE FOCUS10 for 10% off 1 Quote Link to comment Share on other sites More sharing options...
D13 HPD 95 Posted September 2, 2018 Author Share Posted September 2, 2018 Stock header tank back in and new carbon dipped washer fluid cap just got to install the front strut brace brackets now 1 Quote Link to comment Share on other sites More sharing options...
b4zz Posted September 2, 2018 Share Posted September 2, 2018 looking good Quote Link to comment Share on other sites More sharing options...
D13 HPD 95 Posted September 2, 2018 Author Share Posted September 2, 2018 6 hours ago, b4zz said: looking good Much better now 🙂 Quote Link to comment Share on other sites More sharing options...
zain611 Posted September 3, 2018 Share Posted September 3, 2018 Any plans on getting the engine cover to match the carbon theme? Nice touch the washer fluid cap. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.