M1tch666 Posted July 4, 2021 Share Posted July 4, 2021 1 hour ago, unofix said: Hi Colin, the radio logos are part of a different file. You need to format a USB pen (ExFat) and create a folder called "SyncMyRide" in the folder place the radio logo file and also on USB pen, but NOT inside the folder place the install file. Put the USB pen the car, switch on and it will install the logos, takes less than 5 minuets. Logo file = 1U5T-14G658-AF_1598633324000.TAR.GZ Did this, still no logos Quote Link to comment Share on other sites More sharing options...
M1tch666 Posted July 6, 2021 Share Posted July 6, 2021 Can anyone help? Or do I just have to activate via Forscan and remove the climate in the same manner? Quote Link to comment Share on other sites More sharing options...
unofix Posted July 6, 2021 Share Posted July 6, 2021 Hi Colin, if you want to remove climate from your Sync3 system you will have to do that using ForScan. Question is how did you end up with climate settings on the screen in the first place? The logos don't have anything to do with ForScan, so it won't help. If they installed from the USB then they should just appear. Mind you not all stations have a logo. Also you need to turn then on in you Sync3 settings. Don't set the text to scroll or the logos won't work on some screen views. Quote Link to comment Share on other sites More sharing options...
M1tch666 Posted July 7, 2021 Share Posted July 7, 2021 Climate settings appeared when I updated to 3.4. I didn't go past the 19101 update and the climate has appeared. I've read elsewhere you need to activate logos on forscan. There's nowhere to set them on in sync 3 settings and nowhere to set the text to scroll?? Quote Link to comment Share on other sites More sharing options...
unofix Posted July 7, 2021 Share Posted July 7, 2021 Hi Colin, there is not an option in ForScan to deal with the radio logos, it is just one of the options on the Sync3 radio settings. Please see the attached photos. Text scroll has now been called "Slide Show" don't know when that happened. Quote Link to comment Share on other sites More sharing options...
M1tch666 Posted July 7, 2021 Share Posted July 7, 2021 Hi, Ok, I don't have slideshow or logo option. Quote Link to comment Share on other sites More sharing options...
M1tch666 Posted July 7, 2021 Share Posted July 7, 2021 I did manage to remove the climate using forscan. Quote Link to comment Share on other sites More sharing options...
M1tch666 Posted July 7, 2021 Share Posted July 7, 2021 I did have them after I enabled enhanced dab on forscan but lost them after car restart. Quote Link to comment Share on other sites More sharing options...
unofix Posted July 7, 2021 Share Posted July 7, 2021 17 minutes ago, M1tch666 said: enabled enhanced dab Ok, I see your problem now. It may be worth going back in with ForScan and seeing if Enhanced DAB is still enabled. It might be after your recent update that it has been disabled again. Quote Link to comment Share on other sites More sharing options...
M1tch666 Posted July 7, 2021 Share Posted July 7, 2021 I enabled it today when I got rid of the climate controls. I did a master reset after unplugging the laptop. It kept my change with the climate but that was in the apim build. The enabled enhanced dab was only done in the config. I'll check it again when I get home... Quote Link to comment Share on other sites More sharing options...
unofix Posted July 7, 2021 Share Posted July 7, 2021 (edited) Just had a similar thing happen with mine today, did the change to add AHB to the car which seems to have gone ok, but the auto locking option on my instrument display just vanished. Had to go back in to the IPC Module and turn it back to Enabled. Still can't figure out how turning on AHB could disable the auto locking on the display. Edited July 7, 2021 by unofix Quote Link to comment Share on other sites More sharing options...
M1tch666 Posted July 7, 2021 Share Posted July 7, 2021 I'll try this in the APIM build... Quote Link to comment Share on other sites More sharing options...
M1tch666 Posted July 7, 2021 Share Posted July 7, 2021 Ok, enhanced is still on but don't have the options. It's listed for enhanced dab on the apim so I'm guessing I need to do the apim update..... I thought forscan could do an auto update but the option isn't available?? Can anyone guide me as to what I need to do next? Quote Link to comment Share on other sites More sharing options...
M1tch666 Posted July 14, 2021 Share Posted July 14, 2021 I've performed another update and now have logos working. I am now getting a Navigation mulfunction. Please visit your dealer for service. Can anyone help me with this? Quote Link to comment Share on other sites More sharing options...
ianincheshire Posted July 15, 2021 Share Posted July 15, 2021 Quote Link to comment Share on other sites More sharing options...
M1tch666 Posted July 15, 2021 Share Posted July 15, 2021 4 hours ago, ianincheshire said: Thanks Ian, but mines is a mk3. It isn't showing the faults in your link, it just gives me the navigation malfunction message. Quote Link to comment Share on other sites More sharing options...
M1tch666 Posted July 18, 2021 Share Posted July 18, 2021 Sorted. Downgraded to lower 3.4 and upgraded again including the maps. Can anyone tell me what I need to enable in forscan to get the nav replicating next to the trip comp? Quote Link to comment Share on other sites More sharing options...
Zokisu Posted November 9, 2021 Share Posted November 9, 2021 I'm always back to factory settings when I turn on car. I have dark mode selected, but when I restart the car, I am back on "auto". I also have to do phone pairing for android auto every time I start the car again. And there is an error that it cannot be connected, but It connects when I hit close. Any idea about that? BTW: as I understand, if this won't be repaired, I'm stuck with bugs forever? Not any possibility to go to original Ford version? Quote Link to comment Share on other sites More sharing options...
unofix Posted November 9, 2021 Share Posted November 9, 2021 1 hour ago, Zokisu said: Not any possibility to go to original Ford version? You can use the "Format" tool from Cyanlabs and reload the original software Quote Link to comment Share on other sites More sharing options...
Zokisu Posted November 9, 2021 Share Posted November 9, 2021 9 minutes ago, unofix said: You can use the "Format" tool from Cyanlabs and reload the original software Thanks! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.