ianincheshire Posted September 25, 2020 Share Posted September 25, 2020 Quote Is this going to cause problems? You would hope not, given that it's an official update package. I think @alexp999 posted the info above to fix it if it does cause any issues You have the instructions about right but if you're unsure of the procedure then there's a link on the Ford site to download instructions https://www.ford.co.uk/owner/resources-and-support/sync-bluetooth/update#/instructions/app/ The app update was quick enough to do without the engine running, it only took about 15 mins and (assuming the battery is fully charged) sync will stay up for 30 mins. Once the update had completed and the log file uploaded , the 22Gb map update was available almost immediately. The map update is going to need the engine on though... Quote Link to comment Share on other sites More sharing options...
rayferry Posted September 25, 2020 Share Posted September 25, 2020 Just checked my VIN and the update was available. Downloaded and installed no maps available yet. Quote Link to comment Share on other sites More sharing options...
alexp999 Posted September 25, 2020 Share Posted September 25, 2020 Just now, rayferry said: Just checked my VIN and the update was available. Downloaded and installed no maps available yet. Did you upload the XML from the first update? Quote Link to comment Share on other sites More sharing options...
rayferry Posted September 25, 2020 Share Posted September 25, 2020 1 minute ago, alexp999 said: Did you upload the XML from the first update? Yes I did Quote Link to comment Share on other sites More sharing options...
ianincheshire Posted September 25, 2020 Share Posted September 25, 2020 Give it a few minutes and try again... Quote Link to comment Share on other sites More sharing options...
rayferry Posted September 25, 2020 Share Posted September 25, 2020 That's about 20 minutes from when I uploaded the XML file still no maps. Quote Link to comment Share on other sites More sharing options...
ianincheshire Posted September 25, 2020 Share Posted September 25, 2020 That might be because the Ford server is overloaded with us all downloading updates😁 My map update is about 50% downloaded , its only taken about an hour so far on a 40Mb Fibre connection. Quote Link to comment Share on other sites More sharing options...
Comares2001 Posted September 25, 2020 Share Posted September 25, 2020 You must have been lucky. I downloaded 3.4 at 0800 and uploaded xml file but no map update yet. Just saying software up to date 1 Quote Link to comment Share on other sites More sharing options...
PLB Posted September 25, 2020 Share Posted September 25, 2020 Just checked and yes, finally I am also being offered the update. At last !! 🍾 Quote Link to comment Share on other sites More sharing options...
simps100 Posted September 25, 2020 Share Posted September 25, 2020 I just tried to do this in my focus 20 plate - update seemed to go ok but my radio station screen still looks the same as before - were the logos not moved to the right hand side or is that a different update? Also weirdly within settings the General tab is faded out and can not select it, same as ambient lighting settings which is odd as they worked before! Edit: looks like abit more has gone wrong too - it’s stuck in night mode and my reversing camera / sensors no longer show on the screen... just got home going to turn it all off and hope for the best when I try again later! Quote Link to comment Share on other sites More sharing options...
jamokuga Posted September 25, 2020 Share Posted September 25, 2020 Just updated my 20 plate Focus too. It was already on sync 3.4 so not noticed any changes yet. The F9 map isn't available to download yet though. I just get the usual message that my software is up to date... Quote Link to comment Share on other sites More sharing options...
alexp999 Posted September 25, 2020 Share Posted September 25, 2020 20 minutes ago, simps100 said: I just tried to do this in my focus 20 plate - update seemed to go ok but my radio station screen still looks the same as before - were the logos not moved to the right hand side or is that a different update? Also weirdly within settings the General tab is faded out and can not select it, same as ambient lighting settings which is odd as they worked before! Edit: looks like abit more has gone wrong too - it’s stuck in night mode and my reversing camera / sensors no longer show on the screen... just got home going to turn it all off and hope for the best when I try again later! If your Focus was built after October, it will have already had the new 3.4 UI. Quote Link to comment Share on other sites More sharing options...
simps100 Posted September 25, 2020 Share Posted September 25, 2020 4 minutes ago, alexp999 said: If your Focus was built after October, it will have already had the new 3.4 UI. Thankfully after turning it all off for 5 mins the menus started to work and the camera come back - was there not a UI which moved the logo to the other side or am I going mad? This is what I see now. Quote Link to comment Share on other sites More sharing options...
alexp999 Posted September 25, 2020 Share Posted September 25, 2020 1 minute ago, simps100 said: Thankfully after turning it all off for 5 mins the menus started to work and the camera come back - was there not a UI which moved the logo to the other side or am I going mad? This is what I see now. The newer 20196 moves it to the right, much better layout imo. Quote Link to comment Share on other sites More sharing options...
simps100 Posted September 25, 2020 Share Posted September 25, 2020 6 minutes ago, alexp999 said: The newer 20196 moves it to the right, much better layout imo. Ah thought there was one which did move it to the right agreed looks better in pictures - I guess 20196 isn’t officially available from Ford just yet? Quote Link to comment Share on other sites More sharing options...
Mark-UK Posted September 25, 2020 Share Posted September 25, 2020 I'm sure somebody said the was a calm screen which just showed the clock by pressing the screen off button twice, this does not work for me. Quote Link to comment Share on other sites More sharing options...
DaSingh Posted September 25, 2020 Share Posted September 25, 2020 You might have to enable calm screen using forscan 1 Quote Link to comment Share on other sites More sharing options...
colinmcg71 Posted September 25, 2020 Share Posted September 25, 2020 1 hour ago, Mark-UK said: I'm sure somebody said the was a calm screen which just showed the clock by pressing the screen off button twice, this does not work for me. Calm screen works for me. 1st press of screen off button is calm screen, 2nd press is screen off. Quote Link to comment Share on other sites More sharing options...
shawty1984 Posted September 25, 2020 Share Posted September 25, 2020 Does it have to be done in exfat? Every time I format in exfat, the USB in the car doesn't recognise it. Quote Link to comment Share on other sites More sharing options...
Comares2001 Posted September 25, 2020 Share Posted September 25, 2020 2 hours ago, jamokuga said: Just updated my 20 plate Focus too. It was already on sync 3.4 so not noticed any changes yet. The F9 map isn't available to download yet though. I just get the usual message that my software is up to date... Its out there on the server but by now every owner in Europe could be trying to download it at the same time , so we're probably back to just waiting or maybe trying during the night Quote Link to comment Share on other sites More sharing options...
colinmcg71 Posted September 25, 2020 Share Posted September 25, 2020 52 minutes ago, shawty1984 said: Does it have to be done in exfat? Every time I format in exfat, the USB in the car doesn't recognise it. That’s strange, it should just work. The instructions on the Ford website state the usb drive should be formatted exfat. Quote Link to comment Share on other sites More sharing options...
shawty1984 Posted September 25, 2020 Share Posted September 25, 2020 Just now, colinmcg71 said: That’s strange, it should just work. The instructions on the Ford website state the usb drive should be formatted exfat. I know, the USB works in the car but when formatted to exfat, says it's not supported. Going to try formatting it on the PC instead of the Chromebook to see if that's why. Quote Link to comment Share on other sites More sharing options...
Comares2001 Posted September 25, 2020 Share Posted September 25, 2020 If its not a stupid question what vehicle are you trying to update as your profile shows you have a 2013 status? Quote Link to comment Share on other sites More sharing options...
Andyr55 Posted September 25, 2020 Author Share Posted September 25, 2020 Guys I’m struggling cansomeone attach a screenshot of the files (extracted) for first download? thanks Quote Link to comment Share on other sites More sharing options...
shawty1984 Posted September 25, 2020 Share Posted September 25, 2020 24 minutes ago, Comares2001 said: If its not a stupid question what vehicle are you trying to update as your profile shows you have a 2013 status? Mk4 ST, just haven't updated my profile. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.