nazsky786 Posted June 23, 2014 Share Posted June 23, 2014 The xenon loom bit comes from all over the place. You have some which go to the blue connector and some which go directly to the outside with the Y connector you mentioned. That's why I choose just to change the loom. Harder to get in but overall way better way or doing it instead of pinning wires etc. Quote Link to comment Share on other sites More sharing options...
nazsky786 Posted June 23, 2014 Share Posted June 23, 2014 I think the ones that go directly out are for the leveling sensors. Then the blue connector just carry the configuration info. And the light switch. Don't get me wrong changing the loom is a lot of work. Quote Link to comment Share on other sites More sharing options...
Megado Posted June 23, 2014 Share Posted June 23, 2014 OK, dismantle center console first, might easiest way to start. Quote Link to comment Share on other sites More sharing options...
nazsky786 Posted June 23, 2014 Share Posted June 23, 2014 Yh dismantle the centre console screws near the back. Then take everything you can off the steering wheel and the dashboard itself. Side kick panels a pillars. Glove box, panels . Then there are screws all at the bottom the top bit off dash is covered by clips just pull. Quote Link to comment Share on other sites More sharing options...
nazsky786 Posted June 23, 2014 Share Posted June 23, 2014 I seem to have made the issue worse. I messed with that connector and the airbag light is on now. Going to have to keep messing with it. Quote Link to comment Share on other sites More sharing options...
Megado Posted June 23, 2014 Share Posted June 23, 2014 I seem to have made the issue worse. I messed with that connector and the airbag light is on now. Going to have to keep messing with it. Not shut down on ELMconfig or Forscan? Quote Link to comment Share on other sites More sharing options...
nazsky786 Posted June 23, 2014 Share Posted June 23, 2014 Forscan has a b2227 error. Which is front crash sensor communication fault. So that connector is being a real issue. Quote Link to comment Share on other sites More sharing options...
mixmasterlooney Posted June 23, 2014 Share Posted June 23, 2014 What do you mean by mess with it and what connector exactly? Sent from my GT-I9300 using Ford OC mobile app Quote Link to comment Share on other sites More sharing options...
nazsky786 Posted June 23, 2014 Share Posted June 23, 2014 Connector c111 the big connector it behing passenger kick panel. Quote Link to comment Share on other sites More sharing options...
Megado Posted June 23, 2014 Share Posted June 23, 2014 Connector c111 the big connector it behing passenger kick panel. And it's black 40pins or so, little Y center of female connector. It's collect all Xenon and lights wire together. :) Quote Link to comment Share on other sites More sharing options...
Megado Posted June 26, 2014 Share Posted June 26, 2014 Tomorrow i go to buy pair of used headlights(190€/pc) , and try fit with out any wiring. Quote Link to comment Share on other sites More sharing options...
nazsky786 Posted June 26, 2014 Share Posted June 26, 2014 Black inner or chrome? Still have my connector issue. Have you replaced the wiring ? Quote Link to comment Share on other sites More sharing options...
Megado Posted June 26, 2014 Share Posted June 26, 2014 My wiring, is still on delivery, comes from GB so i have to wait until it deliver. Black of course, don't like too much chrome. I just make test for lights tomorrow, Quote Link to comment Share on other sites More sharing options...
nazsky786 Posted June 26, 2014 Share Posted June 26, 2014 Headlights will go all the way down if you don't have everything connected up. And the connectors are hard to take off. Quote Link to comment Share on other sites More sharing options...
Megado Posted June 26, 2014 Share Posted June 26, 2014 Headlights will go all the way down if you don't have everything connected up. And the connectors are hard to take off. I know about that. My car connectors from lights are not so hard to take of, because i'd lubricated them, just little bit of silicon, after i cleaned them :) Quote Link to comment Share on other sites More sharing options...
nazsky786 Posted June 26, 2014 Share Posted June 26, 2014 Thinking ahead. Still trying to find the sensor and bolts. You might get this done before me. Quote Link to comment Share on other sites More sharing options...
Megado Posted June 26, 2014 Share Posted June 26, 2014 Thinking ahead. Still trying to find the sensor and bolts. You might get this done before me. Ask focuscarbreakers2010 on eBay, thats seller i bought wiring harness, he's breaking ST225 http://www.ebay.com/usr/focuscarbreakers2010 Quote Link to comment Share on other sites More sharing options...
nazsky786 Posted June 26, 2014 Share Posted June 26, 2014 Tried he don't have it. Quote Link to comment Share on other sites More sharing options...
Megado Posted June 27, 2014 Share Posted June 27, 2014 Actually, headlights are 90% black, 10% chrome, Just now little washing. They cave me little discount, 20€ cheaper than normal price, one rubber shield missing on parking lamp. Quote Link to comment Share on other sites More sharing options...
Megado Posted June 27, 2014 Share Posted June 27, 2014 Closer inspection, Left handside assembly from parking light, is broken. Adapter that hold parking lamp in right position, is cracked. I think someone took too much power to turn lamp right place causing crack to holder, and lamp is wrong place causing again heat more holder. :( Well i go monday another place to take left side lamp assembly. Quote Link to comment Share on other sites More sharing options...
mixmasterlooney Posted June 27, 2014 Share Posted June 27, 2014 Yeah those plastic things become fragile after few years and crack easily Sent from my GT-I9300 using Ford OC mobile app Quote Link to comment Share on other sites More sharing options...
nazsky786 Posted June 27, 2014 Share Posted June 27, 2014 It's best you return and get another pair. If you replace only one at a time they make the car look weird. I did it people thought I had an accident. Quote Link to comment Share on other sites More sharing options...
mixmasterlooney Posted June 27, 2014 Share Posted June 27, 2014 Are you talking about the colour difference of the light? Sent from my GT-I9300 using Ford OC mobile app Quote Link to comment Share on other sites More sharing options...
nazsky786 Posted June 27, 2014 Share Posted June 27, 2014 No. The older the light the more dirt and marks be on it. I'm doing the lighting mod. Do you know what wires are dlr for the headlight? Quote Link to comment Share on other sites More sharing options...
Megado Posted June 28, 2014 Share Posted June 28, 2014 It's best you return and get another pair. If you replace only one at a time they make the car look weird. I did it people thought I had an accident. Return is a problem, they don't accept return, because product they sell, it's as it. Buyer accept terms, on selling situation, and those are from damaged vehicle, but i can live with that :) Here's some testing foto's. D1S is original, park lamp is philips LED's and foglamps, are some chinese led, H11 30W. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.